Questions & Answers for: ohm spec ignition wires

Ad

...ohm meter, but you need to have the ignition on for at least one of these tests. Mine fails when the engine gets hot- both the igniter and the coil seem very heat-sensitive, and one of my cylinders ...

Ad

...outback ? Whats the ohm spec for the ignition wires on the subaru outback 2006? I want to check to see if they need replacing. I can check with an Ohm meter if I knew the spec.  Anybody? 540 ...

Ad

Question about 2006 Outback

1 Answer

ignition wires worn out? Whats the ohm spec for ignition wires Most wires are around 7ohms.

...ignition module. this is under the 3 coils they sit on the ign module..You can also test and or replace the spark plug wires, if a wire is 10 inches long it should read 10,000 ohms or less.. No more ...

Question about 1999 Avenger

1 Answer

...cylinders, then check your distributor cap for cracks, even very tiny ones. If you have ignition coils, then check the specs with an OHM meter. The OHM meter can also be used to check the plug

...ignition coils ohm specs 1996 Vulcan 1500 Classic ignition coils. Clymer says primary resistance 1.9-2.9 ohms. I read 3.8 ohms. Clymer says secondary resistance 18k-28k ohms. I read 33k ohms. Reads ...

Question about 1996 VN 1500 Vulcan Classic

1 Answer

...spec, go back up to step 5 If coils are bad, replace as needed and retest to confirm Step 8:(90% of the time i bet the problem is solved by now) Start engine. Perform underhood visual inspection of ...

Question about 1994 4Runner

1 Answer

...ohm's resistance and are within spec's. I've checked all fuse-able link's,and relay's. A friend has a 95 runner and i took all the relay's, ecu,coil, igniter and plugged them into mine and still ...

...ignition is turned on ! ohmed all 6 injectors 12.5 ohms spec is 11 - 14 ohms unpluged ecm ohmed wiring from ecm to injector connector ok ! im having trouble finding a schematic online for inj 2 15amp ...

...ignition coil and pickup coil Stator resistance should be low (probably less then .2 ohm), your looking for continuity between the 2 or 3 (usually yellow) wires but not to ground. The rotor should ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22331 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...