Questions & Answers for: Suzuki GSX 750 F (Katana ohm spec ignition wires

Question about 1994 GSX 750 F (Katana)

2 Answers

ignition coil wires 2 and 3 are connected to the right coil and 1 and 4 is the left coil. Firing order is 1243. First cylinder is the far left and the far right cylinder is 4. On the left coil the off

Ad

Question about 1991 GSX 750 F (Katana)

1 Answer

Engine smokes / Ignition coil wire repairable? I am trying to tune up my 1991 Suzuki Katana GSX 750 F. I pulled the number one ignition coil wire off and it seperated at the spark plug boot base (top)

Ad

Question about 2006 GSX 750 F (Katana)

1 Answer

ohm meter. 2006 headlight should receive power if the ignition shitch is in the run position. No power going to the light with the ignition in run? Find the fuse. Check it with a tester dont just look

Question about 2006 GSX 750 F (Katana)

1 Answer

how to change spark plugs on a 2006 suzuki gsxr 750 Have you taken off the fairings? Look on the valve cover for ignition wires and under them should be your plugs

Question about 1990 GSX 750 F (Katana)

0 Answer

...wires, ignition box- then it started firing, it stopped, messed arround again, started up ran for a full minute while reving , then died again. I charge battery, take apart plug wires, unplug coils, ...

Question about 1989 GSX 750 F (Katana)

1 Answer

motor turns over, no start, , bike starts up w/push Sounds like you have a bad earth in the ignition, remove your ignition and check for damaged wires or a bad earth

...gsx750f ignition fuse blows as soon as i turn the ignition on Check the wiring for a dead short after the fuse. check for pinched wires or burnt wires or wires rubbed through and touching the

Question about 1993 GSX 750 F (Katana)

1 Answer

ignition wiring diagram Go to http://www.alpha-sports.com/suzuki_parts.htm, search the year of your bike, find your bike and then open the wiring diagram that will be available

...ohm scale 100 ohms or less . Simply touch one lead to the ground source and the other lead to the battery negative terminal, a reading of zero indicates a clean solid ground. Any number reading or ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...