Jabra Answered Questions & Fixed Issues

Hi,Instructions on how to pair blue tooth device with black berry.


Pair Your Blackberry with a Bluetooth Headset



Turn on Bluetooth headset and Blackberry hand-held.

Enable the Bluetooth radio by going to the options window and clicking on Bluetooth. Click on Enable Bluetooth in that window.

Add your Bluetooth headset to your Blackberry by clicking on Add Device in the Bluetooth window.

Find and select the name of your Bluetooth headset from the list that appears. The Blackberry will search for all Bluetooth devices within range, so other devices might show up on the list.


Click Activate Bluetooth device if you receive a call and the Bluetooth headset does not pick up automatically.



Use your Bluetooth Headset with your Blackberry

Make sure the Bluetooth radio on your Blackberry is turned on before you try to use your Bluetooth headset.

Use the voice-dial feature to call contacts if your headset has that capability. Not all headsets support voice dialing, but more of the newer models do.

Press the on/off button on your headset to end a call or use the end button on the handheld.



Tips & Warnings

Pair your Blackberry with any Bluetooth-enabled device using the same steps as those for connecting a Bluetooth headset.

Remove your Bluetooth headset from the list of paired devices on your Blackberry by selecting and clicking on Delete Device in the Bluetooth window.

Configure your Blackberry to connect to a paired Bluetooth headset without asking for authorization in the Bluetooth Device Properties window. That will allow your headset to automatically reconnect even if you take it out of range temporarily.

Only configure a Bluetooth headset to your Blackberry once. Once you configure the pairing between the two devices, the settings are saved and you do not have to repeat the processes each time you use it.

Turn off the Bluetooth radio on your Blackberry when not in use for security reasons.

Adjust volume on your headset or hand-held to a comfortable level. Excess volume from in-the-ear headsets can cause hearing damage.

Have a nice day .

Most headphones (wireless) have a tuning wheel that allows you to find your headphone channel pair to base set. It sounds that while checking your foam ear piece you may have moved this dial / wheel. After locating (probably near volume) the control for tune, place headphones on and slowly move control for tuning. You should hear something move control to strongest signal. your base also has settings switch for channel helpful if you have more then one pair in house, on different TV. Play with both to find best volume.

I can offer for you turn on "Youtube" find how resembling some smart phones. Information you'll get adapt for yourself.

do a web or yellow page search for repair shop in your area

My Bluetooth speaker only plays when it is charging

boil it in water 4 a bit to reset the mainframe. no code requires after this

You can buy the whole thing for $10.92 on ebay. If you're in the U.S. Jabra BT 135 Verizon Bluetooth Headset

0000 did you use 0000 for the pin https://www.youtube.com/watch?v=DY26J3IpeIA

www.jabra.com/support

Your battery is no good. If you've had it for a while then the battery's life has been used up. All rechargable batteries have a certain amount of times they can be discharged and recharged. Once that amount is met end of battery. If it is new then send it back for a replacement.

I'm not familiar with that particular equipment but the default pairing code for many bluetooth devices is 0000 (four zeroes).
Hope that helps.

I just got mine and had the same problem. After messing with it for I bit I got it to work. The trick is you must have audio of some kind playing through the jabra when using the volume button. I started some music playing and then tried the button and it worked. But if it is idle you just get the battery status.

I just got mine and had the same problem. After messing with it for a bit I got it to work. The trick is you must have audio of some kind playing through the jabra when using the volume button. I started some music playing and then tried the button and it worked. But if it is idle you just get the battery status.

Turn your music or TV on your phone. Turn on headset. Turn on blu tooth. After headset connects, the sound should stop coming out of phone. Turn up volume on phone and headset. If this does not work, repair the headset to phone. Then repeat steps.

?? your contacts list isn't stored in your earpiece , its stored in your phone that the earpiece connects via Bluetooth too , so if your "phone" doesn't verbally announce whos calling to you then I don't see how your ear piece is going to ??

The headset contains a lithium ion rechargeable battery, which should be charged before using the headset for the first time.

System requirements for battery charge using USB

Personal Computer with pre-installed with any of the following operating systems and USB port: Operating Systems (when using Windows) Windows® 7 Home Basic / Home Premium / Professional / Ultimate Windows Vista® (Service Pack 2 or later) Home Basic / Home Premium / Business / Ultimate Windows® XP (Service Pack 3 or later) Home Edition / Professional / Media Center Edition 2004 / Media Center Edition 2005 (when using Macintosh) Mac OS X (version.10.3 or later)

Charging the headset

1. Open the cover of the micro-USB port.

Insert the tip of your fingernail in the groove, and open the cover.

1. Connect the supplied micro-USB cable to the headset, and then connect the other end to a computer.

Make sure that you connect the plug of the micro-USB cable in the direction as shown in the illustration below. Charging starts when the headset and the computer are connected. Make sure that the indicator (red) lights up. Charging is completed in about 6 hours* and the indicator (red) goes off automatically. *Time required to charge the empty battery to its full capacity Notes

• If the headset is not used for a long time, the indicator (red) may not light up when you connect the micro-USB cable to charge the headset. In this case, do not disconnect the micro-USB cable from the headset and wait until the indicator (red) lights up.

• When you close the cover of the micro-USB port after charging the battery, push the catch at the edge (the round part) of the cover into the port compartment.

1. Catch

Tips

• If the micro-USB cable is connected to a computer while the headset is turned on, the headset will be turned off automatically.

• To charge the headset from an AC outlet, use USB Charging AC Power Adaptor* (sold separately). For details, refer to the manuals supplied with the USB Charging AC Power Adaptor.

• The headset cannot be turned on while charging the battery.

*Refer to the Reference Guide on the recommended adapter. Caution If the headset detects a problem while charging, the indicator (red) may turn off, although charging is not complete. Check for the following causes:

• Ambient temperature exceeds the range of 5 °C - 35 °C (41 °F - 95 °F).

• There is a problem with the battery.

In this case, charge again within the above-mentioned temperature range. If the problem persists, consult your nearest Sony dealer.

Notes

• If the headset is not used for a long time, the battery may be quickly depleted, however, after a few recharges, the battery life will improve.

• Even if you do not intend to use the headset for a long time, charge the battery to its full capacity once every 6 months to maintain its performance.

• If the headset is not used for a long time, it may take longer to charge the battery.

• If the life of the built-in rechargeable battery drops to half the normal length, the battery should be replaced. Consult your nearest Sony dealer for replacement of the rechargeable battery.

• Avoid exposure to temperature extremes, direct sunlight, moisture, sand, dust or mechanical shock. Never leave the headset in a car parked in the sun.

• If the computer enters into hibernation mode while connected to the headset, charging will not be completed properly. Check the setting of the computer before charging. The indicator (red) will go off automatically even if the computer enters into hibernation mode. Charge the headset again in this case.

• Use the supplied micro-USB cable only, and connect directly to a computer. Charging will not be completed properly by an indirect connection, such as via a USB hub.

Usage hours

Status Approx. usage hours Communication time (including music playback time) (up to) 30 hours Standby time (up to) 200 hours The communication time will be about 15 hours when it is charged for 2 hours. Time stated above may vary, depending on ambient temperature or conditions of use.

Checking the remaining battery

If you press the POWER button while the headset is turned on, the indicator (red) flashes. You can check the remaining battery by the number of times the indicator (red) flashes. The indicator (red) flashes immediately after the headset is turned on to indicate the remaining battery power. Indicator (red) Status 3 times Full 2 times Mid 1 time Low (needs to charge) Note

• You cannot check the remaining battery during pairing operation.

When the battery is almost empty The indicator turns red. When the battery becomes empty, the headset sounds a beep and turns off automatically.

The Pairing key is 0000 Have you tried to pair with other devices ? It can support up to 8, connected to two at the same time as well. Jabra Bluetooth Headsets Wireless Speakers Office Speakerphones

Hi Robert See if Jabra Have One.... Search the Internet You Bought Jabra.... One of the Best... so They should have support As in their Video Here How to pair Jabra BT2045 EasyGo Jabra Headset Bluetooth Android iPhone

Joy, RE POST more info required, make,model#, complete question To show your appreciation press the helpful button and follow me on fixya for more tips and info