Trying to connect jabra BT2080 to phone. says
- Bluetooth device A looks for other Bluetooth devices in the area
In order to find other Bluetooth devices, Bluetooth device A must be set to discoverable mode. When set to discoverable, Bluetooth device A will allow other Bluetooth devices to detect its presence and attempt to establish a connection.
You may set your discover setting off if you like (It is recommended that you turn it off when not using the Bluetooth). When the discover setting is off, no other Bluetooth device will be able to find it. Undiscoverable devices can still communicate with each other but they have to initiate communication themselves.
- Bluetooth device A finds Bluetooth device B
Usually the discoverable device will indicate what type of device it is (Such as a printer, cell phone, headset, etc.) and its Bluetooth device name. The Bluetooth device name is the name that you give the Bluetooth device or the factory name that originally was programmed.
- Bluetooth Device A prompts you to enter a password (PassKey)
With advanced devices (i.e. computers, smartphones), both users must agree on the Passkey and enter it into their device. The code can be anything you like as long as it is the same for both Bluetooth wireless devices.
On other devices, such as Bluetooth headsets, the Passkey stays the same. Refer to the product's manual for the default passkey. Most often, the default passkey is "0000".
- Bluetooth device A sends the Passkey to Bluetooth device B
12/24/2022 2:36:32 PM •
Jabra BT2080...
•
Answered
on Dec 24, 2022
•
590 views
Connecting two devices on BT3030 headphones
A method to do pairing in "the second channel."
- Trun off BT3030 first.
- Continue pushing the power button till "Jabra" mark turns on pink next.
Attention： Continue pushing the power button after "Jabra" mark became the blue.
12/12/2022 2:25:53 PM •
Jabra BT3030...
•
Answered
on Dec 12, 2022
•
3,702 views
Sony ericsson mobile
not really sure what your problem is ,
but if it is on how to pair a bluetooth ear piece to the phone this will vary slightly depending on the ear piece you are trying to pair.
8/20/2021 4:11:48 PM •
Jabra Sony...
•
Answered
on Aug 20, 2021
•
228 views
Headset does not ring in ear, only on the phone.
I had the same problem with my GN9125 headset and GN1000 remote answerer (lifter arm). There is a knob at the top end of the lifter arm contraption that adjusts "Ring Sensor Sensitivity" (yeah, NOT a very intuitive phrase!) - You have to twist the knob in the direction of the arrow to "increase the sensitivity". Twist it slowly while the phone is ringing and eventually you'll start hearing the ring in the headset. You can see diagrams in the GN1000 manual, which you can find online by googling.
4/27/2021 3:59:42 PM •
Jabra GN9125...
•
Answered
on Apr 27, 2021
•
3,011 views
Resetting my jabra extreme 2
If your Jabra Extreme2 Voice guidance is not turned on - i.e. you only hear beeps when you power on or a call comes in...
Cause: powered on or off with answer button depressed
Solution:
1) Power off
2) Hold down answer button (the one that lights up Jabra)
3) Power on
4) Release answer button
You may need to repeat.
Not finding what you are looking for?
