20 Most Recent Brother PE770 Computerized Sewing Machine - Page 2 Questions & Answers

this is a 4"x 4" sewing field.

Judy, I believe the best way to determine the stabilizer for your need, would be a test and play method. Work your way up to where you are satisfied with the results. I believe you will find the perfect setting for your project. GOOD LUCK FRIEND.

sounds like a needle problem, make sure the needle is the right size, try lowering it (loosen the needle screw and drop it down just a tiny)

First check threading. If it is done properly, then it's probably because it is dirty between the lower tension blade and the bobbin case body. Remove this blade, clean, reassemble and it shoud work.

In order to 'see' the .pes files you have to have some software to read it like embird or embrillance. Embird is $164 but has some neat features such as being able to change colors and convert from one type embroidery files to another. You can just transfer them to the USB drive by: Plug in your drive, copying them, eject the usb drive, and then plug it into the machine. The machine will read it without you having a program that can read machine formats.

The way you are explaining your problem makes me think your. spool is knotted. Check it buy pulling out and unraveling the thread. This may answer your question. GOOD LUCK FRIEND.

I don't think you can turn the alphabet upside down on your machine so why not turn your work instead?

1. thread machine correctly. 2. make sure the bobbin is installed spinning the right way in the bobbin case. 3. put the tension knob back to middle (if this is possible numbered tension knob)

Hello, Unless you have and know how to use digitizing software, will you be able to add width to the satin stitches when doing applique. You need to cut the applique fabric larger than the cut-out-line so the applique fabric will held down properly. Some Commercial or higher end home embroidery machines can re-interpret the embroidery design and widen the satin stitches in a design without software.

Most likely the machine is not threaded correctly or the material is not properly streatched and locked into the hoop.

Completely unthread the top and bobbin threads. Clean any lint build up out of the bobbin race assembly using the little brush and some canned air. Check that the needle is inserted correctly...with the flat side towards the back. Then carefully rethread the top and the bobbin threads. Make sure the bobbin is inserted correctly...if it's backwards the machine won't sew properly.

Try changing your needle, make sure there is no thread caught in the looper, and maybe use different thread brand. My machine does not like Coats and Clark brand it eats it up every time try sulky or another higher end brand thread if your not already using it.

Rethread the top of the machine with the presser foot up; sew with the presser foot down. If the fabric is too thick/too many plies, the presser foot is forced upwards, allowing the top tension to open. This causes thread snarls on the underside. See also: http://www.picturetrail.com/sfx/album/view/22521551

Just because the hoop holder has been moved during transportation. Shut down the machine, manually bring hoop holder in central position in both X and Y, it will restart.

GO TO THIS LINK..IT MAY HELP...IF NOT GO TO YOUTUNE IN HOW TO REPLACE THE SELF THREADER SPRING ON MY BROTHER PE770...http://www.ehow.com/how_7279348_fix-threader-brother-sewing-machine.html

Hai, I think you put the big size bobbin. So only jumping the bobbin. Please try to put the correct size bobbin.