20 Most Recent
Brother PE770 Computerized Sewing Machine - Page 8 Questions & Answers
Brother 770-PE I have Amazing Design software and
well, from what is indicated in the USB manual for your Brother, check that none of the below issues is causing this.
- Ensure that USB media contains data for no more than 200 embroidery patterns since Embroidery patterns cannot be transferred to the machine if the USB media contains data for more than 200 embroidery patterns. If this is the case, reduce the number of designs saved on the USB media.
- if the embroidery designs contain too many colors (this number may vary within the designs themselves), it may not be possible to transfer an embroidery pattern to the machine, even if there are less than 200 embroidery patterns that have been saved on the USB media. In this case also, reduce the number of designs saved on the USB media.
- Save the patterns in the root directory of the USB media. If embroidery data is saved in a folder on USB media, that embroidery data cannot be retrieved by the machine.
thanks for using fixya
When trying to pull the
You might have a bad bobbin case. check for any burrs on the bobbin case, and replace it if so.
I have a new machine
The way the thread passes thru the bobbin tension on this machine makes it real easy but sometimes the thread doesnt go where it is supposed to. Try doing it several times, you can feel the thread get tension when it fits in correctly.
Good Luck
I have a brother pe 770 and the bobbin will not
You need to sew the first stitch slowly. Lower the needle by hand and take up carefully. Pull the needle thread up and the bobbin thread should be caught in the formed loop and come with it. Pull them both to the back of the machine and sew.
PE700 Brother machine
http://www.devicemanuals.com/guide/Sewing%20Machine/Brother/Brother-PE-700II-Domestic-embroidery-Sewing-User-T0RFM05UWT.html
My brother exedra e-40 #db2-b737-413
- In the event that changing the needle didn't determine the issue, have a go at rethreading the machine, guaranteeing legitimate pressure, and cleaning the bobbin region for any build up or garbage. On the off chance that the issue continues to happen, consider counseling the machine manual or looking for proficient help.
Not finding what you are looking for?