nystrom_eile posted an answer for this Singer Sewing Machines:
"Sounds like it is still not feeding smoothly, Try putting some clear tape on the bottom..."
nystrom_eile posted an answer for this Singer 7442 Mechanical Sewing Machine:
"Mine does that only when the presser foot is up, check yours."
nystrom_eile posted an answer for this Singer Sewing Machines:
"Do you mean a rolled hem? If so check out Pinterest.com and do a search. They have some..."
nystrom_eile posted an answer for this Singer 5050 Mechanical Sewing Machine:
"Check your tension disk, You may have some threads stuck in there."
nystrom_eile posted an answer for this Singer Sewing Machines:
"It is the metal "finger" on the presser foot"
nystrom_eile posted an answer for this Singer Tiny Serger TS380:
"I need more infor to help you. I do have that model here at home."
nystrom_eile posted an answer for this Janome Memorycraft 6500P Computerized Sewing Machine:
"Don't stress. Open the acess door and put a few drops where the needle goes up and down..."
nystrom_eile posted an answer for this PfaFF Tiptronic 2040:
"Wow, you've done all the things I would have tried. Sry."
nystrom_eile posted an answer for this PfaFF Creative 7570:
"I usually use my seam ripper tip and a tweezer."
nystrom_eile posted an answer for this PfaFF Sewing Machines:
"Check your upper thread tension first by re threading. If that doesn't help check the..."
nystrom_eile posted an answer for this PfaFF Creative 7570:
"You are not in the bobbin winding mode. Check your manual, usually you have to slide the..."
nystrom_eile posted an answer for this Necchi 3101 Mechanical Sewing Machine:
"Check the bobbin tension. Good videos on Pinterest.com if you need help doing it."
nystrom_eile posted an answer for this Necchi 6015 Mechanical Sewing Machine:
"Increase the upper thread tension, or loosen the bobbin tension to balance them. Put in..."
nystrom_eile posted an answer for this Brother PC-8500 Pacesetter Embroidery & Sewing Machine:
"Check your tension, especially the tension disks for loose thread. Then rethread the whole..."
nystrom_eile posted an answer for this Necchi Sewing Machines:
"This is a tough fix. There is a metal ring with a hook on it that goes around the bobbin...."
nystrom_eile posted an answer for this Lion Brand Homespun Yarn:
"Means turn you work around and just knit on the 8stitches from the last row."
nystrom_eile posted an answer for this Sewing Machines:
"Females are right over, males are always a left overs, lol."
nystrom_eile posted an answer for this Bernina Sewing Machines:
"Lol sry. Check the cord at the machine, not the outlet in the house. Loose plug, maybe?"
nystrom_eile posted an answer for this Sewing Machines:
"The part that holds the bobbin case moves around it after catching the upper thread. ..."
nystrom_eile posted an answer for this Sewing Machines:
"Check you pressed foot lever, my grands set mine off a lot by forgetting to get it fully..."
nystrom_eile posted an answer for this Sewing Machines:
"Sewing machines do not have 2 wheels"
nystrom_eile posted an answer for this Sewing Machines:
"Check your tension. Rethreading the machine making sure the top thread is well between..."
nystrom_eile posted an answer for this Sewing Machines:
"Do you mean the ruffler attachment? If so check the upright thingy that locks into the ..."
nystrom_eile posted an answer for this Sewing Machines:
"Take off the throat plate cover and check for anything stuck like a thread knot or lint. ..."
nystrom_eile posted an answer for this Brother XL-5130 Mechanical Sewing Machine:
"Just start over threading, that's usually the problem."
nystrom_eile posted an answer for this Brother 1034D Mechanical Sewing Machine:
"Why do you want to lower the lower blade. You can sew without cutting by simple swinging..."
nystrom_eile posted an answer for this Brother Sewing Machines:
"Why would you need to do this?"
nystrom_eile posted an answer for this Brother PE770 Computerized Sewing Machine:
"Did you loosen the top thread?"
nystrom_eile posted an answer for this Brother SE-270D Computerized Sewing Machine:
"Use a heavy duty needle- you don't need a top stitch one. Any #16 or 18 should do it. ..."
nystrom_eile posted an answer for this Brother 1034D Mechanical Sewing Machine:
"Had the same prob once. I needed to find the screw that ataches the looper to the machine..."
nystrom_eile posted an answer for this Sewing Machines:
"I think this a timing issue- I saw a good video on Utube. Try a search."