LeapFrog Popular Questions, Answers, Tips & Manuals

open your leapfrog connect and plug in your device to ur pc. click on ur child's name. on the left at the bottom you'll see "on this device" click it, it'll show u a list of what's been bought/downloaded onto the leapster, you can fix it from there I had the same problem 2 weks ago and this is how I fixed it. and if it's not showing an app that you purchased at the very bottom there's a clicky "check for new dowloads" just in case... and here are 2 free codes for you: book 5813 1140 1518 1413 (might be 1314... sorry) game (alphabet stew) 5813 0709 4610 4973 hope they still work....

you don't

probably broken I don't use leapster so I don't know I would call the leapfrog company and see maybe its defective or the batteries I know when we doesn't read the disk somthings wrong my wii actually broke and when ps2 doesn't read the disk its broken trust me hon I know about games and stuff I tend to troll on some online games im bad well hope this helps

try the good old rice trick take the batt out place the device in a zipplock bag with plain old rice let it sit in there for a good day or two the rice absorbs the water from inside the device safest and best way works for other electronics too

what are you on?

thats not good. You should ask someone about that?

Hi JOHN, first try recalibrating it, instructions on how to do that are here:http://leapfrog.custhelp.com/app/answers/detail/a_id/2225If calibration doesn't resolve the issue, you can reset the LeapPad with these steps:1) Launch the LeapFrog Connect application2) Press and hold down Ctrl + Shift + R3) A pop up window will prompt you to connect the device you wish to reset4) Power on and connect the LeapPad

Have the battery checked first as it may not be connected properly or may be no good and not accepting a charge IF you run the machine off the adaptor it probably will not be charging the battery so I suggest you plug in the adaptor and leave the machine off for a few hours to see if the battery will charge.

I used the pencil eraser first on each of my daughter's cartridges. Then I used a qtip to rub them with rubbing alcohol. Finally I used a blow dryer to blow out where the cartridges are installed and now her games are working just fine.

I fixed one by taking it apart and cleaning the 2 pieces of plastic that cling together with glass cleaner. It actually works better then when we first opened the gift. It is a tedious job but now that I've done it once I can probably fix it again in about 20 min. The hardest part is reattaching the spring mechanism which pulls the screen taught. The parts are kind of small.

4444

My new leap pad 2 wont turn on?

use a butter knife strait in and pull the battery cover to the left or right. it is hard to open and ours is becoming broken from trying to open it, among other issues with this stupid gaming system!

SolutionIf your Leapster system does not respond to the stylus pen, it needs to be calibrated. To calibrate your Leapster system:

1. Turn the unit on and wait for the sign-in screen to appear.
2. Hold down the Home, Hint, and B buttons simultaneously.
3. When the screen changes, press the A button.
4. Using the Stylus, touch the center of the targets.

it might be damp, try taking battries out of the unit then wrapping in a towel and leaving it in the hot water cubbord for a few days.

My experience is that after charging for some tens of minutes it will start. But I seem to be unable to charge the battery enough to have it work for long.

Forgot my code For Leap frog For Wifi

cdcd

4 (four).

Hi, I just had to take a picture and theyre sending a new one, I dont have to return the broken one