Kohler Answered Questions & Fixed Issues

I would take it back for another toilet.

Koehler gen set while running automatically off and not showing any codes

i found that the fuel pump had gotten to weak to keep fuel supplied

Likely the carburetor inlet needle valve not closing. Remove carburetor bowl and check for debris. If nothing found, replace needle and fuel filter.

Get a water closet auger at the hardware which will allow you to remove any obstruction in the gooseneck part of the toilet.

flush time depends on how much water is in it,
the water level flote has an adjuster on it, but i cant rember were it is,,, sorry

Kohler has good support. You can view the diagrams for that unit with the link I am posting. There are no filters listed in the diagram that might need to be cleaned. There is a chance that the unit has developed a clog from hair etc in the pump impellor. The flange may have come loose and is allowing air in the suction side of the pump too. Kohler has online chat and support numbers you can call too. K-1357-RA ' Devonshire 5-Foot Whirlpool with Apron and Right Drain ' KOHLER

$112 here https://www.generatorguru.com/battery-71533669/ And spares https://www.generatorguru.com/6500e-1/ ..

check the fuel system some do not have seperate fuel pumps for motor and generator

#K4421 Re black specks coming from rim jets (only). Me too. Looks like bits of rotting rubber. Water in tank is clear-no specks there. I suspect the small hose from fill valve to top of flush piston may be breaking down, as it has gone rigid and I'm afraid to squeeze it lest it shatter. First thing I'll try is replacing that hose, if I can find one. My daughter has same toilet but no "specks". With her toilet, it's the same small hose but the problem is it occasionally pops off at fill valve end. I can fix that with wire but when I find hose source, I'll buy two.

you tube is the video website

just turn the water valve down some

Try requesting a manual from Kohler.

U need to make sure that the relay driving ur auto start stay closed all thru the crank cycle.

Rent a multimeter and test your connections. As well as checking the breaker

Request the wiring diagram from Kohler.

https://www.google.com/url?sa=t&source=web&rct=j&url=http://www.kohlerpower.cn/engines/onlinecatalog/pdf/24_690_30_EN.pdf&ved=2ahUKEwiEw7e5_OroAhVtlHIEHR5-CpcQFjAAegQIAxAB&usg=AOvVaw1Qo4TEuRMO-RcjkUYlHM_B

There is no small disk behind the aerator in the pullout handle of the K-10433. Where is it? Please help!

Likely needs a new cartridge.