Kohler Logo

Kohler Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 1K Products
  • 12K Answers
  • 466K Views

I don't know this specific tub, but here's the pictoral. The button (90105) should come out of its base, held by friction of O ring. This should allow you to disconnect the pressure line. If you are looking to replace the complete assembly, likely you will need a basin wrench to reach nut (65157).
kohler1-ggmuzyqdnvlyrlfigj0gxfoh-4-0.png Here are links to Kohler, specific to this tub.
https://www.us.kohler.com/us/catalog/svg_viewer.jsp?productId=415928&diagram=3 https://www.us.kohler.com/webassets/kpna/catalog/pdf/en/1010564_5.pdf

Kohler Home | Answered on Mar 18, 2019


you have kids??? theres probably something large in the trap

Kohler Home | Answered on Mar 10, 2019


call a plumber if you dont know what to do...

Kohler - Toilet... | Answered on Mar 04, 2019


We had a problem with phantom flushing. Call Kholer. They will send redesigned battery holder and top of flush unit for free. Seems to have fixed the issue.

Kohler Home | Answered on Mar 04, 2019


Smart-a$$ answer is to find an old 3 gallon pot in a salvage place. Best answer is to fiddle with the chain that goes from the handle to the flush flapper and see if adjusting its length makes a difference. If it's too short it might result in letting the flapper closing too soon and allowing your deposit to remain.

Kohler Home | Answered on Mar 01, 2019


http://www.kohlerpower.com/onlinecatalog/pdf/g2058.pdf
Safety shutdowns:
  1. Loss of coolant
  2. High water temperature
  3. Low oil pressure
Likely one of these. If no indicators at a panel check at the connector.

Kohler... | Answered on Feb 19, 2019


Your focus indicates a sewer issue and not a drain issue.
The first challenge is to determine which branch leg of the sewer is the issue and then assess where all your access ports are. Sometimes an outside access port has been covered over by dirt/mulch etc.
If you know where the blockage is ... then as mentioned by other contributors ... you will need a snake. They can be hand driven or motor driven. For great access to the blockage you may need to remove the closest toilet, since snaking through the lower S trap of the toilet really inhibits the snake's effectiveness. Depending on how your house is built ... the roof sewer vent pipes can be a good access point (and sometimes that is where the debris has gotten into your sewer if you have overhanging trees). I have had success with running a garden house up to the roof and down through the vent pipe. You need to have a second person watching by the the toilet to make sure it does not back flow on to the floor. You can get hose spray attachments which help propel the hose and add turbulence to break the blockage ... but I have never tried them.
If your blockage is recurring over the seasons ... and if you have a number of trees close to your sewer line outside then you can have tree root intrusion into the sewer. In that case you need a professional with a special snake that actually has cutting capability to remove the roots.
Attached are 3 photos ... manual snake, motor snake, hose spray nozzle
Good luck with your troubleshooting!
capture2-bc3vgyatevd4ip5u5o1k1tox-1-0.png

capture1-bc3vgyatevd4ip5u5o1k1tox-1-2.png

capture-bc3vgyatevd4ip5u5o1k1tox-1-5.png

Kohler Model... | Answered on Jan 12, 2019


There's something blocking it sometimes if you turn the water off in your home and turn it back on sometimes calcium from the pipes break loose and cause blockage in new style washerless valve assemblies.

Kohler Home | Answered on Jan 11, 2019


Only if you don't mind having to replace the valve after you finish forcing it with pliers.

Kohler Plumbing | Answered on Jan 08, 2019


Get a water hose,place in tub,connect to water outlet,turn on for a minute,then turn off.then disconnect hose,then water will come out.

Kohler Home | Answered on Dec 29, 2018


Should be a pretty easy fix, you need to remove the faceplate for the faucet then there should be a gap between the wall in the faucet valve and you should be able to see two screws that are holding it on to the wood stud in the wall, you can remove the screws and put a couple washes behind the valve that way it will bring it out further and you should be able to get your handle on it without a problem.
12_26_2018_1_35_52_pm.jpg

Kohler Plumbing | Answered on Dec 26, 2018


There might be two reasons for the failure of generator auto start.

1. It is the ATS automatic conversion control device that does not issue the start generator command after the mains power failure or phase loss operation, or the self-starting relay failure, which causes the generator to not start itself. This situation is relatively rare.

2. It is the generator start battery failure, and this kind of situation is relatively more.

Kohler... | Answered on Dec 19, 2018

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kohler Experts

Donni Steen

Level 3 Expert

687 Answers

Bill Boyd

Level 3 Expert

53745 Answers

 steve
steve

Level 3 Expert

22176 Answers

Are you a Kohler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...