My stove top now keeps clicking, even when it is

Hi pauliepaul22,

The ignition switches probably got wet.

Please follow my below Tip on how to fix it:

GAS STOVE CLICKING PROBLEM...

Kind Regards

JEDEMEYER1

* If this solution helped you, please accept it

Hi abbilou_78,

I believe your ignition switches have come in to contact with either water or moisture.

Please read my below Tip on how to fix the problem:

GAS KITCHEN APPLIANCE CLICKING SOUND...

If it does not solve your problem, I'd suggest replacing the ignition switches.

Kind Regards

JEDEMEYER1

* If you found this solution helpful, please rate it

unplug the stove and plug it back in. if it keeps ticking, your spark module is going bad

Hi,
Here is a tip that I wrote that will help figure out why the burner spark keeps on clicking...

Gas Range Repair Burners Keep on Clicking
http://www.fixya.com/support/r4033033-gas_range_repair_burners_keep_clicking

heatman101

The electrodes have moisture around them still and you can assist in them drying with a hair dryer or even turning the stove tops on for about 15 minutes to assist in drying them out. Don't go ordering parts you do not need. Thanks, Rick

I have a stove that doesn't light (click) I've replaced the igniters, I've replaced the knobs, and I've replace the box all the igniters and plugged into. There's nothing else to change out and it still doesn't give a spark. I've got gas and electricity but nothing will light

Hi, normally what causes the igniter to keep clicking is spilling water or something down into the knob area. The water is causing a short circuit in the switch which is mounted on each burner valve shaft. If unplugging the range for several days to allow drying doesn't fix the problem, then one of the switches will need to be replaced.

All of the igniters are connected to one source. A series of small switches mount on each stem of each burner. Any of them can fire up the spark box and it in turn it fires off all the ignitors. If a boil over spills liquid into one or more of them switches the resulting continuity causes the clicking. Removing one wire at a time from each switch till the clicking stops is the solution.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Parts links:

Ignition switch: http://www.repairclinic.com/referral.asp?R=154&N=2326

Spark Module: http://www.repairclinic.com/referral.asp?R=154&N=400570
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" http://www.rd.com/advice-and-know-how/repairing-ranges-cooktops-and-ovens/article16294.html

Hi,
Here is a tip that I wrote that will help figure out why the burner spark keepson clicking...

Gas Range RepairBurners Keep on Clicking
heatman101

bvn