Question about Maytag Neptune Washing Machines
...the machine does not seem to know it. Error on the door lock or the door switch, try and use a switch cleaner, remove and reset the lock or check the harness to the switch click this link: Door ...
code d5 Will not start Please reset the door lock and mechanism, check the door switch, click on Door reset
Question about Maytag Neptune Washing Machines
...door is open but the lock mechanism is locked so cannot shut the door. Is there a code for this?? try un pluging washer for 15min and plug back in to see if it resets. if not u may need new latch but ...
Question about Maytag Neptune Washing Machines
...lock is not working or is jammed and hence the drive does not work in the reverse direction. It will be best to reset the drum and rotor mechanism, free with grease and oil and reset. The machine can ...
whasher door is locked I have a maytag washer model mah5500bww that is dead. After trying to find a solution seems like we better buy a new one but the problem is that it is laoded and the door is ...
door lock I would try jumping the door switch and see if the problem goes away. This worked for me-with power on, "od" displayed, I opened the door. There are two plastic locking latches in the front;
Question about Maytag Neptune Washing Machines
...door lock mechanism. You have to remove the (4) phillips screws and then you can remove the soap dispenser lid and bezel. You should be able to see a colored cord that looks like really thick fishing ...
Question about Maytag Neptune Washing Machines
door lock doesn't go on. i unplug and wait for 15-20 minutes and do the same thing. and nothing happens? WASHER WILL NOT START: Power If your washing machine won't start, begin by looking at the power
Question about Maytag Neptune Washing Machines
...door lock then the washer may not start. The main control board on most washers is complicated and difficult to diagnose without proper test equipment and procedures. You can visually inspect the ...
Question about Kenmore Washing Machines
...door lock sensor, and the control board. Check the wiring harness for any signs of damage or corrosion. Check the control board: If everything else checks out, there may be an issue with the control ...
1,827 questions posted
Usually answered in minutes!
2,979 Questions
358 Questions
175 Questions
151 Questions