Maytag Washing Machines - Recent Questions, Troubleshooting & Support

i don't know. i just repaired a top load with same symptoms.
I found the pin on lid did not quite reach the 'CLOSED SWITCH'. finger on lid was plastic so i had to lift lid and raise pressure switch by wrapping a ribbon of sheet aluminum around it so plastic lid pin could reach it. do not
cheat this safety switch as it shuts off spin so folks won't loose their arm. DO NOT BY PASS THIS SAFETY SWITCH.

Maytag Washing... | Answered 2 days ago

Leveling the machine might work.

Maytag Washing... | Answered on Mar 18, 2019

In my case it was a old connector harness located on your motor. Leads comming from tacho ( 2 red wires) were not passing thru harness. I rilpped them off and made solid but crimps.

Hope this helps a little.

Maytag MAH8700A... | Answered on Mar 17, 2019

Your washer is off balance or the load is unbalanced. If uL (unbalanced load) appears in display, the load is out of balance. The washer is running a load-balance correction routine.Sep 25, 2018

Maytag Washing... | Answered on Mar 17, 2019

Two front panels with same error likely means its not the front panel but the control board. If the same service tech replaced the front panel twice and now same problem, he should realize the problem is not the front panel. But its easy for me to sit here in hindsight (and still be wrong). So absolutely no guarantee replacing the $300+ control board will fix the issue.

Maytag Washing... | Answered on Mar 10, 2019

You have a washer timer issue.

Maytag Washing... | Answered on Mar 09, 2019

Not finding what you are looking for?
Maytag Logo

Family Lines

19,882 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts


Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

603 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides