...clutch will cost around $80. This a common issue with the FAV6800AW and FAV9800AW. Don't spend $900 and don't trash your $1000 machine it is a easy fix just at tight work area. Post back after you ...
Question about Maytag Neptune Washing Machines
replace the clutch with this Clothes Washer Clutch - 25001169 clutch just to see if it would work several months ago to possibly offer folks a better cost replacement for the clutch. It works fine, AZ
...basic mechanical skill sets can save their $1000 machine for low cost maintenance or Clutch pulley replacement. FAV6800A/FAV9800A Service Manual for reference. Sears Parts Direct for reference. ...
cost saving DIY time. A couple other Forum members were luck like me and a clean and re-lube with WD-40 did the trick, no hard failure of the clutch. As I mentioned back in mid Dec 08 I may need to re
Question about Maytag Neptune Washing Machines
...clutch replacement and a repair person 0.5 hour of labor cost if you know what you are doing,. If you can get someone to help you I will offer phone support for the process if needed with no cost and ...
REPLACE CLUTCH Hello rcolip, It is a Clutch issue. The One-Way Roller Clutches in the hub of the clutch are not locking up in Spin cycle. Most times you can get away with a low cost Clutch Maintenance
Question about Maytag Neptune Washing Machines
...cost could be from $10 dollars if you just need a roller clutch clean up and re-lube to $50 -140 for a replacement clutch. I'm cheap and would go for the $50 Clutch. What is the serial number of ...
Question about Maytag Neptune Washing Machines
...mechanical skill sets can save there $1000 machine for low cost maintenance or Clutch pulley replacement.......Rich FAV6800A/FAV9800A Service Manual for reference. Sears Parts Direct for
Question about Maytag Neptune Washing Machines
...cost around $10 if the One-Way Roller just need to be cleaned up and re-lubed. If the Clutch pulley needs to be replaced I will show you a site where you can purchase for around $60 delivered to the ...
clutch and inspecting and re-lube of the One-Way Roller clutches bearing. You will find links to the Service Manual at that post. Read this post1 and this post2 for removing the Outer Tub Bearings and
1,827 questions posted
Usually answered in minutes!
2,979 Questions
358 Questions
175 Questions
151 Questions