20 Most Recent
Westell Wirespeed VersaLink (A99-327W11-00) Router (A99327W1100) - Page 2 Questions & Answers
Can't connect my 2nd Nook Tablet
Since the nook is wireless, I don't understand what the problem is. Doesn't your nook make a wireless connection? Does it recognize any of the other wireless signals in your area? If it doesn't recognize any wireless signals, then the problem is in your nook and not from your router. Try going by a Barnes and Nobel book store and see if it will log onto theirs. And most Barnes and Nobles have people trained on Nook troubleshooting.
2/1/2012 5:38:21 PM •
Westell...
•
Answered
on Feb 01, 2012
My pc is connected to
- From the Apple menu,
choose System Preferences.
- Click the Network icon.
- From the left-hand column, click on the type of connection you want to renew (e.g., Ethernet or AirPort).
- Click the Advanced button in the lower-right corner of the window.
- Click the TCP/IP tab at the top of the window.
- Click the Renew DHCP Lease button in the upper-right corner of the window.
- Click OK.
- Log in to The
Network Page and register your
computer.
1/7/2012 3:37:37 AM •
Westell...
•
Answered
on Jan 07, 2012
N router for dsl
Dozens of models ranging in price from $50 to $250. D-Link alone has six 802.11n routers
1/7/2012 3:33:44 AM •
Westell...
•
Answered
on Jan 07, 2012
Did I give the wrongpassword?
Are you trying to connect wireless? Have you check if it will work via hard wired cable connection? If you want you can check for the configuration settings of your router and check if internet will work after these steps.Follow this instructions:1. connect via hard wired connection using your PC (network cable)2. open your internet explorer or any browser.3. type the numbers 192.168.1.1 on the address bar4. you will be routed to your router's settings, type admin for USERNAME: and admin for PASSWORD.5. look for the basic setup/settings6. look for the wireless settings7. under your SSID comes the WEP or WPA-PSK option8. that is your wi-fi password, then modified it and remember the password you use for you will need to enter it on your pc when you are connecting via wireless connection.you can select ASCII for password. it should be alpha numeric or combination of letters and numbers.9. select save and apply. then you are good to go.
12/29/2011 12:35:28 AM •
Westell...
•
Answered
on Dec 29, 2011
Need to hard reset westell 7500 modem to factory
- Note:
Resetting your router to the factory defaults not only changes your
router user name and password to the factory default values, but it also
deletes all your home network settings. This includes the SSID and
network encryption key. After you reset your router to the factory
defaults, your home network won't be accessible until you reconfigure
your router and all your network devices to use the same SSID and
encryption key.
To reset your VersaLink 7500 gateway to the factory settings:- Hold the reset button on the back panel of the VersaLink 7500 gateway for 30 seconds.
- All your settings will be lost including network encryption information and any SSID information you have entered.
- The gateway user name and password will revert to the default of Admin as the user name and Password as the password.
- Your
VersaLink 7500 gateway is now using the default settings for the
network configuration. This includes the default SSID and network
encryption key. You must re-configure your VersaLink gateway
to match your previous settings that were assigned to all other devices
on your wireless network. Otherwise, no other network devices will be
recognized.
12/28/2011 3:10:07 PM •
Westell...
•
Answered
on Dec 28, 2011
Not finding what you are looking for?