Westell Wirespeed VersaLink (A99-327W11-00) Router (A99327W1100) "ip address 327w" Questions

IP address for my Westell 327W router. Hi froggysmz321, The best way to determine your IP address is to click start run and enter cmd then at the dos prompt enter ipconfig /all which will bring up all

...IP address (192.168.10.2), it does not accept the address of the Westell (192.168.10.1) as a valid gateway IP. The wireless has been disabled on the Westell, the WAN port assigned as static and the ...

...page (192.168.1.1) through IE and Firefox but have been unable to as of yet. Cany anyone help me fix this? Try pushing the reset button to restore the factory default IP address for

IP address for Westell Router 327W The default IP is 192.168.1.1. If doesn't connect you will have to reset the router with the button on the back. The default username/password is admin/password.

...ip address and it is a valid IP address with my connection saying it's connected. HELP PLEASE!!!! hi. i work for verizon tv, internet and phone. and the tech was wrong. it is the unit it self how old ...

IP address of - 192.168.1.254. (Or you can simply type "launchmodem" in the address bar - (one word - no quotes)) This will definitely get you in. You will then see the setup menu. That problem solved

...ip address set to manual. If it is, change it to automatic settings. This will allow for the airport wireless to give you an ip address. From there the airport's internet page should come up and you ...

...IP address of - 192.168.1.254. (Or you can simply type "launchmodem" in the address bar - (one word - no quotes)) This will definitely get you in. You will then see the setup menu. If you see the ...

ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of

...scroll down to internet protocol, highlight it then click on properties below it, make sure Obtain IP address automatically is checked. do this on both computers. Let me know if it works. ...