20 Most Recent
Westell Wirespeed VersaLink (A99-327W11-00) Router (A99327W1100) - Page 9 Questions & Answers
My DSL light stays on in an orange light and I get
unplug all the wires and replug them again and check the browsing. Or if it can't be done then reset the modem by pressing the reset button that would be there on the back of the modem and reconfigure the modem. By typing 192.168.1.1. With the user name and password that should be user name :admin and Password : password or user name : admin and Password: admin. Put your details and save and reboot the modem and then check.
11/19/2009 1:58:22 PM •
Westell...
•
Answered
on Nov 19, 2009
I need help connecting a westell 7500
Westell makes a line of broadband home networking products that enable
residential customers and users in small businesses to access and share
broadband services. These inexpensive DSL router/modems offer
multi-users Internet LAN access for home or business applications. The
Westell router/modems allow you to have the benefits of the "always on"
high-speed broadband Internet connection without losing the ability to
receive voice calls over the same phone line.
-
Step 1
Connect
one end of the Ethernet cable to the computer's Ethernet port. Connect
the other end to the Ethernet port on the back of the Westell router.
-
Step 2
Connect
the barrel end of the router's power cord to the connector labeled "12
v" on the back of the router. Plug the other end of the power cord into
a wall outlet.
-
Step 3
Connect one end of the DSL phone cable to the DSL line jack on the back of the router. Connect the other end to the wall jack.
-
Step 4
Wait for the Ready and the Link LEDs to glow steady green. The router is now ready to use.
11/15/2009 11:37:06 AM •
Westell...
•
Answered
on Nov 15, 2009
My origional user acount stopped working and i
Disconnect your computer from your router.
Restart it.
You should now be able to "logon".
Then, reconnect your Ethernet cable to your router,
and update your anti-virus software, and do a full scan of your computer.
11/13/2009 5:12:08 PM •
Westell...
•
Answered
on Nov 13, 2009
How do i find tha WEP number for mt ps3
First connect your router to computer with ethernet cable.
Then access it with following link.
http://192.168.1.1
or
http://192.168.0.1
type user as "admin" and password as "admin" or blank or "password"
then you can see configuration page of router settings.
Go
to wi fi or wireless menu then find WEP or WAP security code key it is
your password to connect wi fi network.If it is in * or # format then
add new code so you can connect it with new code.
then save settings and restart router.Let me know if you need more assistance.
Thanks.
11/11/2009 10:58:08 AM •
Westell...
•
Answered
on Nov 11, 2009
Hi, I have a
http://www.scribd.com/doc/3173701/Versalink-327W-User-GuideHere is a link to the user guide for the versalink router you may need to contact your dsl provider as well to obtain all the necessary information. A much easier way is to just purchase a wireless router but if you still want to use the versalink just reference the manual and contact your provider for any additional information you need. If you need any further assistance please let me know.
Thank you,
Lee
11/10/2009 12:12:54 PM •
Westell...
•
Answered
on Nov 10, 2009
Just wanted to know is there any way to get my ps3 online
try opening a portal from you router to your ps3, the router will shut down all the things it need to in order to play your games more efficiently. If that doesn't work try hard wireing your ps3 to your router. If your getting online on your ps3 wirelessly then try moving your router or your ps3 closer together.
11/8/2009 7:22:39 PM •
Westell...
•
Answered
on Nov 08, 2009
WEP password for Westell 327w
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
p\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
v\:textbox {display:none;}
Slide 1
.O
{color:black;
font-size:149%;}
.O1
{color:black;
font-size:149%;}
a:link
{color:#CCCCFF !important;}
a:active
{color:#3333CC !important;}
a:visited
{color:#B2B2B2 !important;}
Open Internet Explorer & in the URL:// bar type: 192.168.1.1 or dslrouter.
Select Wireless and then select Security from the Configuration
menu.
If you use WPA-PSK or WEP
wireless security, you must configure your computer’s wireless adapter for the security code that you use.
At the Wireless Security drop-down menu, select the desired security option
WEP: Selecting this will enable you to set up WEP security on the VersaLink. The AP card
supports 64-bit, 128-bit, or 256-bit WEP encryption. If WEP is selected, any station can connect to the AP (as long as its SSID matches the AP SSID). If wireless security is disabled, the risk of someone nearby accessing the AP is maximized
type in the desired WEP Password....do not forget to save...
11/7/2009 3:21:51 PM •
Westell...
•
Answered
on Nov 07, 2009
Im looking for westell 327 passwords
Default user is: admin
Default password is: password
Reset the router (hold the small button for at least 10 secs while router is on) and try above.
11/7/2009 2:57:08 AM •
Westell...
•
Answered
on Nov 07, 2009
I need wep key westell model 327w
Unfortunately, no one could not provide you any WEP key. WEP is a key that you set to your router so that no one could connect to your wireless network. As an owner of the network, you should know what your network key was.
If you forgot your WEP key, you need to reset the router to factory default, configure it and set a new WEP key.
That is the only way. Thank you!
11/2/2009 1:45:03 PM •
Westell...
•
Answered
on Nov 02, 2009
I have charter internet with a modem and i have a
I think the Westell Router/modem that you have must be the modem for the DSL connection.
Charter is a cable internet service provider.
You can not use 2 modems connected to each other.
You have a charter modem , you can purchase a wireless router only.
That will work.
Click Here for more info about routers
10/28/2009 12:43:35 PM •
Westell...
•
Answered
on Oct 28, 2009
Cannot connect to SonicWall VPN
My guess is that dhcp is using the same private network scheme. Try changing your home network scheme to something different than your office.
For example:
Office = 192.168.1.x
home = 192.168.2.x
10/22/2009 5:43:36 PM •
Westell...
•
Answered
on Oct 22, 2009
We've misplaced the WEP key for our VersaLink 327W
Howdy,
Logon:
192.168.1.254 [or type in: "launchmodem" no quoted - one word] > Click: Wireless tab > Click: Configure Wireless > In the Wireless SSID: This box will show your WEP key.
(Enter any administrative user name and password if you have security locked to access the "Configure Wireless" zone.)
[This is different from the account name and password used to sign on to your ISP and it may not even be set. Is security is not activated, you will freely pass into the Configure Wireless zone.]
Good luck,
J
10/20/2009 9:44:50 AM •
Westell...
•
Answered
on Oct 20, 2009
What will happen whn field supply of DC motor is
Howdy,
You lose the field magnetism and the motor will no longer turn. And when this happens, you get no rotation of the armature, hence, no alternating connections (through the commutator) of the armature windings which could cause them to burn up and ultimately throw a breaker of blow a fuse. Or start a fire in the worse case, from overheating. Not a good scenario.
Good luck,
J
10/20/2009 9:11:55 AM •
Westell...
•
Answered
on Oct 20, 2009
Wifi
connect router to pc with network cable and enter in your browser the ip adres
you wil see setup from router
go to wirles part and select enable save settings and try to connect again with the wifi
10/17/2009 4:02:33 PM •
Westell...
•
Answered
on Oct 17, 2009
Wireless light is lit on router (Westell 327W) but
You have somehow managed to enable security on your wireless (in my opinion should always be enabled) but if you dont know the passcode or want it disabled then in your web browser type '10.1.1.1' or '192.168.0.1' into the URL bar. Only one of those URL's will work.Then type your username and password (default username should be 'admin' default password should be '0000', it will say in instruction manual) then search through the configuration pages until you find the wireless security and change it accordingly. Sorry I cant give precise help because I dont have that brand of equipment, but you instruction manual should help
10/8/2009 9:44:21 AM •
Westell...
•
Answered
on Oct 08, 2009
Not finding what you are looking for?