20 Most Recent HP DeskJet 5150 InkJet Printer - Page 2 Questions & Answers

first of all try changing the power cable, if the problem persist this is a board problem.

you can find that file here:http://www.opendll.com/index.php?file-download=hpzrm309.dll&arch=32bit&version=2.240.0.0&dsc=Printer-Property-UI-dllIf this is not what you want please clarify your issue, Thank you.

Bought new ink and ink drop is still flashing!

For poor printing problems I suggest you run the Tap 10 diagnostic print test (see link to video below). If the new (or refilled/reman/compatible) HP 56, 57 or 58 ink cartridge refuses to print black/color and/or function at all (i.e. blinking ink light on Deskjet 5000 series printer) or fails to complete the printer alignment following cartridge installation, then the ink cartridge either has a connectivity issue with the flexible printed circuit cable (inside unit where cartridge mates with cable), the rear cartridge contacts or cable contacts are dirty with ink residue, or the cartridge is suffering from marginal internal electrical performance. It is suggested you perform the TAP 43 (and TAP 10) DIAGNOSTIC PRINTER TEST to evaluate the ink cartridges electrical performance. Visit Inkjet411 support site to see instructional video: http://inkjet411.com/?page_id=2358 NOTE: For the HP Deskjet 5000 series printer models, when you get an HP 56, 57 or 58 integrated ink cartridge refilled (i.e. currently offered at Costco or Frys today) or if you buy a remanufactured/compatible HP ink cartridge, the ink levels are not initially reset. However, continuing to use an ink cartridge which displays LOW INK alerts is permitted by the printer, simply select OK, CONTINUE or DISMISS when these alerts are observed. Now, it is possible to reset the ink levels by performing the procedure outlined on Inkjet411's site: http://inkjet411.com/?page_id=1915 To clean the HP 56, 57 or 58 ink cartridges please visit the Inkjet411 site which provides recommendations on how to clean the electrical contacts, flex driver cables and how to perform a hot water flush of the nozzle plate (refer to video): http://inkjet411.com/?page_id=1519

hello

i have this link for you
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02205477&tmp_task=solveCategory&lc=en&dlc=en&cc=ca&lang=en&product=304431

If it does not help you resolve the issue, i strongly suggest contacting HP support



God's speed :)

Dear Lesley,For downloading driver software, please visit the HP site page : http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=304431. On this page, please select your OS and click next. Now, there will be option called "Driver - Product installation software" section, expand and select appropriate version you need to install and you will be taken to download page. Before installing, just remove previous software, if installed (recommended).

Try to get your printer to recognize the new cartridge; go to start - printer and faxes -right click on printer - preferences (printing preferences) -settings -load factory settings. Print test page Ctrl+P

Please post if that worked.

Try to Reinstall the cartridge , if the blinking continue , try to remove ink then unplug the power cord and reconnecting power cord with ink then see blinking for ink , then install the cartridges , if hope this help Mohamed Hejazi Afaqnama - Tripoli, [email protected]

I don't have a solution, but mine is doing the same thing. It also has started printing multiple copies all on its own when I print a multi-page document. It will stop printing, for example, right in the middle of the third page, kick out the page halfway printed, and then start from the beginning all over again. This is my fourth HP product over the years, and I've never had any luck with any of them. They were all short-lived, pc's included.