20 Most Recent HP DeskJet 5150 InkJet Printer - Page 5 Questions & Answers

search, hp downloads ,go to hp- canada [ support & drivers , enter model, operTING SYSTEM AND YOUR in,,, they have free downloads for all their printers, got one there for mine ,it also gives you any updates

It is requiring servicing if you can open the cover and apply some lubricant oil on the steel rod it will fix the problem otherwise show it service center.

Hope this helps. Please rate my response.
Thanks.
Have a good day

HP Deskjet 5150 is highly compatible with windows 7, so no issue for the operating system. Now we check the driver for your printer if it has the latest updated software if it does then there is no issue.

Yes, I would have both cartridges filled with sufficient ink to print in black only. One can go to the control panel for the printer and specify that you want to print in Black and White only, in some cases.

On some HP printers you can use just a black and white cartridge, and others you have to have both cartridges filled with sufficient ink for any printout to occur.

You'll have to experiment a little to find out which type you have.

You can download for free from HP:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=304432&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=304430

http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=304430

Just select the OS you are running.

Hello

You need to re-install the drivers and applications from the printer CD, it will resotre your status box.

Good luck

You need to download a patch from HP. Go tot he HP Print Software Patch When Upgrading Vista to Windows 7

http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77751-1&cc=us&lc=en&dlc=en&product=304431&tmp_track_link=ot_search

This patch will fix known problems with the following features and functionality:

•HP Print Status
•Toolbox
•Ink Levels
•Solution Center
•HP Scan (All-in-One)
•Front panel scan button (All-in-One)

Trust this is helpful. Please vote. :)

HP DeskJet 5150 Printers at times take forever to complete their installation. Be very critical to see if there isn't any task required of you during the hardware detection process, coz this cold hide behind active windows, otherwise

Be patient until it finishes installation, even if process takes 50 minutes, just wait.

Hello.

You are referring to the Print Cartridge Status light.

First, one cartridge could be out of ink. Replace if necessary.

If not, check to be certain that the cartridge is secure. Open the cover and remove and reinsert each cartridge until it "clicks".

Also, the correct cartridges for this printer are: HP No. 56 (C6656A) black inkjet print cartridge, HP No. 57 (C6657A) tri-color inkjet print cartridge.

Hope this resolves your problem.

Hi

check expire date on your new cartridge
in case has pass you need to replace it
with an other


If i had help you pls vote me

hi

i have included some links for your review -- i am certain you will find the solution here

http://h10025.www1.hp.com/ewfrf/wc/product?product=304431&lc=en&cc=ca&dlc=en&lc=en&lang=en&cc=ca&submit=GO

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00000042&tmp_task=solveCategory&lc=en&dlc=en&cc=ca&lang=en&product=304431

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00013609&tmp_track_link=ot_recdoc/c00000042/en_ca/c00013609/loc:1&lc=en&dlc=en&cc=ca&product=304431&lang=en#DJ5100


if this helps, let me know please-- i want to ensure you get the issue resolved

Hi,

This is not Printer or PC USB port issue.

You need to drain the power from PC.

Follow these steps to resolve the issue

1. Disconnect the printer power cord from walljack or surge protector
2. Disconnect the USB cable of printer from PC or vice versa
3. Power off your PC, Disconnect the power cord from wall jack
4. Wait for 5-10 mins
5. Connect the PC power cord and power on the PC and wait till you are able to login to your PC
6. Connect the Printer power cord
7. Connect the USB cable to PC or vice versa you disconnected.

This should resolve the issue.

Is it a genuine HP cartridge? If it is send it back to HP - that should NOT happen!

Hi.

The adapter is a +32V 563mA +15V 533mA dual-voltage outputusing a 3 pins conn.

Part number is 0957-2119 (Espana) or 0957-2119.or 0950-4397.

Here the part from HP: 0957-2119

The best way to get the part is contacting HP support and parts. Here HP parts Europe.

Here a seccond hand offer.

Try at HP Support & Drivers

I have to ask this question of you, just to make sure this is not an issue. Are you using a factory new ink cartridge?
Please consider the following:
If you are using a refilled or third party cartridge that may well be your problem. Most manufacturers build logic into their products to prevent the use of “Other Equipment Manufactured” cartridges as well as re-filled cartridges.
They do this to prevent problems from contaminated inks causing problems with print quality or damaging the physical printhead.
If you are using factory new cartridges, then please call the manufacturers Technical Support for assistance with the warranty on the cartridges
Don