Go into your network connection properties
Make sure they are set to automatically obtain IP addresses.
Then go to the command prompt and type in ipconfig
The default gateway will be the address that you need to type in the browser to bring up the router interface. If nothing happens after that, you may need to reset your router defaults by doing a hard reset on the router.
The "Reset" button is used in rare cases when the WAP may function
improperly. Resetting the WAP will restore the WAP's normal operation while
maintaining the programmed settings. You can also restore the factory default
settings by using the Reset button. Use the restore option in instances where
you may have forgotten your custom password.
a. Resetting the WAP
Push and release the Reset button. The lights on the WAP will
momentarily flash. The Power/Ready light will begin to blink. When the
Power/Ready light becomes solid again, the reset is complete.
b. Restoring the Factory Defaults
Press and hold the Reset button for five seconds then release it. The
lights on the WAP will momentarily flash. The Power/Ready light will
begin to blink. When the Power/Ready light becomes solid again, the
restore is complete.