Belkin (F5D5231-4) Router - Answered Questions & Fixed issues

this is because of the fact that your routers page was not logged out last time and now it shows duplicate administrator.
to remove this error please turn the power of your router off from at least 1 min and then turn it back on
Now open the webpage
and it will work

I ADVISE YOU TO PLEASE SET A PASSWORD TO YOUR ROUTER WEB PAGE

Thnx and i hope this helps
Please rate this solution

you need password or numbers off your router for it to connect

Did you use the pass key to connect? If you are using the wifi you have to go to here 192.168.1.1 with browser type admin for username and admin for pass and config the the router. To make life easy just use a cable ie Ethernet..

well you can fix such kind of problems via contacting to belkin tech support. for more help you may visit: Belkin Tech Support Helpline

Its not necessary to purchase a new router. Nintendo DS supports WEP encryption. You wont be able to connect if the encryption on the router is WPA. Your computer can connect on both WPA and WEP so what i suggest is for you to access the router page then check the wireless settings then change the encryption to WEP so that your Laptop and DS can connect at the same time. To access your router check the manual for the username and password


Thanks for using Fixya.

You've not given enough information to receive a straightforward answer. I assume your problem is that you can't connect to your Belkin router, and that you are trying to connect wirelessly? When you do a site survey (that is, when you click your little antenna icon to 'View Wireless Networks' in the area), do you see anything?

A common problem with wireless on laptops is that the user will accidentally turn it off without realizing. There's usually a switch on the side of the laptop that'll turn on or off your onboard wireless (to save on battery power). Switching that will often resolve the issue.

Hello Orionj2 We can provide you with the best Comcast internet tech support, so if your Comcast internet is not working fine, then you just have to get in touch with support. Call us today and get internet related issues fixed. Comcast Tech Support Internet Help Toll Free 1855 856 2653

try the ubuntu site. there should be a fix there in the forums
also I found this list on tech republic:

1: Knoppix

[UPDATE: New link] Knoppix is one of the better tools for rescuing data from sick machines. It’s a full-blown live Linux distribution with a strong, user-friendly GUI that will allow you to easily mount a drive and then copy the data (which you will locate in an easy-to-use file manager) to an external source. Of course, Knoppix comes with the full arsenal of Linux commands, which place just about everything you need at your fingertips.
2: Trinity Rescue Kit

Trinity Rescue Kit might leave you wondering, “Why isn’t this tool being developed faster and on a larger scale? Although TRK is rather slow to develop, what it offers is just short of amazing. Place it on a USB drive, boot your virus-laden machine, and scan the mounted drives with clamav, antivir, bitdefender, and more. This tool is all command line, so you might have to bone up on your commands to really make use of it.
3: Avira AntiVir

Avira AntiVir is a command-line antivirus tool that is fast, robust, and dependable. There is a GUI tool, but installing it is almost more trouble than it’s worth. (It requires Java.) Installing AntiVir on Linux isn’t the easiest of tasks, but it’s certainly no kernel compilation.
4: GParted Live

GParted Live is a live Linux distribution that allows you to manipulate partitions on a drive. It supports numerous file systems and lets you can resize, create, and delete, partitions. You can run GParted Live from a CD or a USB drive, so it’s very portable.
5: SystemRescueCd

SystemRescueCd is another live Linux rescue CD that offers numerous tools to handle numerous tasks, including partition manipulation, file recovery, hard disk testing, ftp, and disk formatting. As with most live Linux distributions, you can place SystemRescueCd on either or CD or USB drive, and it offers an easy-to-use GUI and plenty of tools.
6: Ubuntu Rescue Remix

Ubuntu Rescue Remix is quickly becoming one of my favorite data recovery tools. Like all good live Linux CD tools, it includes an outstanding GUI (it is Ubuntu after all) that can help you handle tasks other tools can’t handle. You can recover and rescue Mac files/filesystems, recover data from nonstandard external drives, recover deleted files, and more. The one thing URR is missing is antivirus tools. But, since this is a Linux rescue disc, once installed, you can simply add the tools you need to your USB live CD.
7: F-Secure Rescue CD

F-Secure Rescue CD is based on Knoppix and allows you to check the integrity of your installed applications. It also allows advanced data repair and recovery, as well as recovery from that ever-dreaded malware!
8: Ddrescue

Ddrescue is a Linux tool designed to copy data from one file block device to another. This tool will aid you in rescuing data when your drive is suffering from read errors. Unlike many of the tools on this list, Ddrescue is not a live distribution but a tool you will use on a running Linux machine. So to rescue data, you will have to attach that troubled disk to the working Linux machine.
9: Safecopy

Safecopy is similar to ddrescue, allowing you to copy files from a disk suffering from I/O errors. It also includes a tool that allows you to read data from CDs in raw mode, as well as issue device resets and simulate bad media for testing and benchmarking.
10: Linux rescue mode

This is the only entry on the list that isn’t a downloadable tool. Linux rescue mode is a mode booted with the help of a Linux boot CD, allowing you to repair a broken system. From rescue mode, you can recover a root password, repair or reinstall the boot loader, and more. When you boot into rescue mode, it will typically mount your installed system into /mnt/sysimage, where you can take care of any business necessary.
More rescue tools?

These 10 Linux tools can help you recover, rescue, and repair a Linux, Windows, or Mac machine. Of course, plenty more tools are out there. Have you come across a Linux tool that can help you repair or recover a damaged or sick drive? If so, share it with your fellow TechRepublic members.

There's no such thing as a driver for a router. You have a wireless NIC driver which can be found on the computer manufacturer site.

Can you give us more information about your setup? Are you trying an ethernet cable? or are you on WIFI? Have you checked your router's DHCP settings, to verify that DHCP is turned on.

You can find a User Manual here: https://www2.belkin.com/support/article/?lid=en&pid=F5D5231-4&aid=5106&scid=220

The router has the capability to automatically check for a newer version of firmware and alert you when it's available. Follow the steps below if you would like to enable this feature. Note: We recommend you use a computer that has a wired connection to the router. Setup Steps:

1. Open your web browser.
2. In the address bar, type http://192.168.2.1 and hit Enter.
3. Click Login. The router does not ship with a password, so just click Submit.

1. Click System Settings.

1. Select Enable and click Apply Changes.

A cable?

No disc required.Connect the ISP modem to main up-link port in router. Then connect PC to any other port. Done!Wireless is a different setup.

you have the option to reset the password, by clicking on "i cannot access my account" and answer the security questions you created when you created this account. the option is available just below the sign in button in the yahoo home page, http://mail.yahoo.com

The easy way to get password is to left click on Internet access bars near time on computer.When box appears showing wireless connections right click on your name connected to.In drop box choose properties then under security click show characters to reveal password.Hope this helps please rate

DHCP Client list shows the list of devices currently connected to the Router You cannot remove an IP Address of a device connected from this list ..Regards TOM

If the RED light is for POWER. Then the router is already busted. If the RED light is for the INTERNET light, then it's just a configuration. Best person to contact is your ISP (internet service provider)..But if you can provide me details of what is your ISP and what authentication they are using, I can definitely assist you. :) Regards.

You can get the installation manual on line. Just clarify me your router's model in order to get you to the exact link, or use this link and locate it by yourself.

In case of a problem or clarification or further details needed, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

Before you start :
The Following Steps Should be done on the computer that is connected to the router (Plugged with a cable)


Step 1 : Make sure you have internet access

Step 2 : Open Router Setup by typing http://192.168.2.1 in the address bar of Internet Explorer

Step 3 : Once you are at the router setup .. on the left side underneath Wireless you can find Wi-Fi Protected Setup

Click it

Step 4 : If it is asking for a password .. leave the password field blank and click submit

Step 5 : Disable Wi Fi Protected Setup and click apply changes

Step 6 : Now on the left under wireless click Security

Step 7 : If it is asking for a password .. leave the password field blank and click submit

Step 8 : Change the Security mode to WPA-PSK (you can also choose WPA-2 but sometimes it doesnt work )

Step 9 : Type a password (8 Characters , It is Case Sensitive)

Step 10: Click apply Changes

Step 11: On the left , Under Wireless Click Channel and SSiD

Step 12: Change the SSiD to a Different name , Change the Wireless Channel to 11

Step 13:Click Apply Changes

Turn On the Wireless Switch on the Computer (If you are using a Laptop to Connect between router)

Now try to Connect to this new network on both your wireless Computers and Ipad

Let Me Know if it Works