Nostalgia Electrics Recent Questions, Troubleshooting Help & Support

dated: Wednesday, November 20th, 2013 Call: Rival Customer Service at 1-800-557-4825 With your model number & part number

There are no wiring diagrams for this manufacturer. General wiring practices are that the Hot wire(black) goes to the thermostats, and the neutral wire( White ) is attached to the heat element for the return. Switches are on the Black wires to break the circuit before power reaches the item it is controlling. A white wire on a switch is for the return from the light in the switch.

You need a new start device if your compressor is not running/pumping.That is the box on the side of the compressor .If you can put your hand on the compressor to make sure it (compressor) is than you have a Freon leak. The small line copper coming off the compressor should be between 75 & approximately 85 if its not ho you have Freon leak somewhere.

duplicate question.

Inspect every connection for a loose wire. That is the only reason for no power.

http://www.nostalgiaelectrics.com/ This is the current reseller of Nostalgiac electrics.Unfortunately, they will not help you in any way. Your only action is to throw it away, parts are not available anywhere.

You cannot. All poppers of that style will a some "fall out". The better commercial machines have very little as the kettles are deeper, but you cannot eliminate it. The unpopped kernels are not reusable.