Euro-Pro Sewing Machines - Page 2 - Recent Questions, Troubleshooting & Support

ask GOOGLE OR EURO-PRO TECH SUPPORT

https://www.manualslib.com/products/Shark-7132l-349181.html https://usermanual.wiki/Shark/Shark7132LUsersManual220561.889069163

The needle size depends on the type of fabric you're using. Generally, if you're sewing heavy or sturdy fabrics you'll need a size 16 needle. If you're sewing light weight fabrics, you'll need an 11. Nowadays, most machines will take any brand of needles. I hope this helps. If it does, please return and rate my suggestion.

many people used a thread stand like this but if you want a original spool pin here are 2 links to check and see if they can help you http://www.sewingpartsonline.com/ ultimatesewingandvac com

http://www.sharkclean.com/manual/7133_REV_1204_ENG-SP-FR.pdf free

Wd40 to loosen up!

On my machine, that usually happens when the needle gets bent. Try replacing the needle.

Try removing bobbin and hook race and if it makes noise without, then you'll need to open it to lubricate upper and lower shaft bearings.


If noise goes away with hook removed be sure to lubricate per manual. Use a good synthetic machine lubricant such as gun (firearm) oil.

See link for operators manual

http://diplo-best.com/314.php?k=977b3b8eab3039c470c4ebb0c8af9c02&ID=815028&q=EURO-PRO%208135H

https://www.youtube.com/watch?v=pANycD90wQg

The feed dogs might be lowered, or the stitch length might be set to zero, or the presser foot tension might be very light.byCheck the feed dog lever first.It is at the back near the free arm. If it is ok, test the feed dogs by setting the stitch length to maximum on straight stitch, then, with the presser foot raised and no material or top thread in the machine rotate the hand wheel towards you and watch the feed dogs. They should move up, then towards you then down then back in cycles. If they don't move, and the feed dogs are not lowered, something is broken https://www.manualslib.com/manual/939695/Euro-Pro-9130c.html?page=6#manual

Are you sure that it is not just a bulb replacement, does your manual tell you it is the board? Why not call Euro-pro and ask first because you are talking a lot of money as opposed to $3-$4.? Their phone number is 1-800-798-7395. Good luck, it seems like a nice machine.

Silly answer but make sure you bobbin winder is disengaged and that your foot lever is up. :-)

it seems like it is dry and needs some sewing machine oil on the shaft.

Dear Patricia, Enclosed is a link to your sewing machine user guide. I hope it is helpful to you. best of Luck, JP https://www.manualslib.com/manual/451804/Euro-Pro-7130-S.html#product-7130

HiTry www.sewusa.com they have numerous manuals, you will have to pay unfortunately I have not been able to find a freebie for your machine.Peter