My Shark navigator is making
I had the same noise coming out of the side of the canister although I would specify it as a sucking noise. The noise is coming out of a hole on the side of the canister. If you block the hole it sounds normal. This lead me to believe that there was no damage. After further research I found that this whole is actually a release when air cannot make it through the top of the canister. Simple resolution. Take the canister out of its holster and clean both the top part and the metal cone inside and your vacuum will work good as new :) ~=MaGiC=~
My fryer won't do a thing
there is a shut off swich and if you dont slide it into the deep fryer part correctly it wont turn on or do any thing the other is to make sure the breaker in the back of the unit is pushed in
I'm looking for the service Manual for an Omega Euro-Pro Serger. Model number 434D.
You can try contacting Euro-Pro directly to see if they have a service manual available for the Omega Euro-Pro Serger model 434D. Alternatively, you can try searching for the manual online through a search engine or online manual database. There are also online forums and communities dedicated to sewing and serging that may have resources or advice on how to troubleshoot or repair your machine.
Euro fryer won't heat up
I have the same fryer and the exact same problem. I had to replace the relay on the pc board. OKS2C-S15DC12V Relay can be purchased on eBay for about $5.
Not finding what you are looking for?