Re: Do you know how to print a config page with the ip...
To print a config page you go into service mode (*28*) -copier>option>p print this will print out all the configs. For just the ip address go in to the add. function >network>ip4>ip
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the printer already has an IP address and you know what it is by printing a config page, the simplest thing to do is connect a pc directly to the printer using a cross over network cable.
Ensure the IP address in the PC is in the same range as the printer ie only the fourth octet is different.
Ensure you can PING the printer
Enter the current IP address of the 9022 in a web browser and it should take you to the printers internal web page whic will allow you to change network settings.
An alternative option is to use the ARP command at the DOS prompt, for this you will need the MAC for the network card on the printer, this will be on the printed network config page and on a lable on the network card.
For help on the ARP command type;
ARP /?
At the DOS command propt on a PC.
A third option is to use a software utility called SYNCTHRU supplied on the installation CD that was with the network card when new.
Let's set a static IP address for the printer:<br /><br />- Print a Network Config Page from the front of the printer. Note the printer's IP address.<br />- Type that IP address into a browser to reveal the printer's internal settings.<br />- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.<br />-
On this screen you want to set a Manual IP. You need to set an IP
address outside the range that the router automatically sets (called
the DHCP range). You can change the DHCP range of the router using its
internal settings page.<br />- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)<br />- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.<br />- Click 'Apply'.<br /><br />Now, shut down the router and printer, start the router, wait, then start the printer.<br /><br />After this you may need to redo 'Add a Printer' using the new IP address.
For a Canon C3220: - Choose the Printer tab on the touch screen- Under Printer Status, go to Settings- Go to Functions- Go to Print Pages- Select Configuration The configuration page will print out. Thanks for using FixYa! For configuration page instructions on other copiers, printers, and fax machines, check out the How to print config pages blog.
If you're at the copier, go into User Tools, and then under System Settings there should be a Network section, and then in that Network section you should be able to find the IP address.
You can also print out a config page by going into User Tools and then Printer Settings, and selecting List/Test Print. The config page will have all of your network settings, including IP address.
If you're running Windows Vista and the 1515 is hooked up to your computer, you can view the IP address by hovering over the copier on the Network Map (from the Network and Sharing Center).
The easiest way to do that is to log on to the machine with your computer via your internet browser.In your internet browser,tipe the ip address of the machine.You will be able to acsess the adress book and update it.
press the option switch in screen press function press print pages print configuration page see the ip address & install the printer on this ip in your computer networks use tcp\ip is smaller than machine ip if machines ip is 192.168.1.33 computers ip is 192.168.1.32
Hi,
1.On the drivers CD You must have Quick Config tool.Just click on setup Icon and follow directions.
2.Or just press "printer"Button on the operation panel of machine.Go to Interface-TCP/IP and You will see IP adress.
You can also from printer menu select "print Status Page" and page will be printed.You can find IP adress on the status page.
To get into the web configuration you need to know your firmware on the DPR-1260. If it is 1.12, us http://dlinkps-xxxxxx where the X's are the last 6 number of the mac address. If it is 1.20 and up, use http://dlink-xxxxxx, where the x's are the last 6 number of the mac address. If you do set it up as DHCP or static and know the ip address of the print server just type in the ip address of the print server on the address bar.
×