KM 3050 Add paper to manual cassette. Machine will not print out receaved faxes in memory. Cannot delete fax on pause in memory. Removed fax card and will print from all cassettes. Refit fax card and same problem exists.

Either the paper size in the fax machine is wrong or there is not enough paper left to print the fax. Add paler and the machine will print the faxes held in memory.

If the machine receives a fax under one of the following conditions, the machine will not be able to print the received fax and will automatically store it in its memory.Ink has run out while receiving a fax.Paper has run out while receiving a fax.

• Paper other than A4, Letter, or Legal-sized papers are loaded.
  
• OFF is selected for Auto Print in User Settings.
  
• You pressed the Stop button to cancel printing of a fax.

1. Make sure that the plain paper is loaded in the Rear Tray.

2. Display the Memory reference screen.
(1) Press the FAX button, and press the Menu button.
(2) Use the (-) or (+) button to select Memory reference, and press the OK button.

3. Print all the received documents in the memory.
(1) Use the (-) or (+) button to select Print all RX docs.

• To print the list of documents in the memory, select Print memory list.
  
• To print a specified document, select Print specified doc..
  
• To delete a specified document, select Delete specified doc..
  
• To delete all documents in the memory at the same time, select Delete all documents.
  

(2) Press the OK button.
(3) Use the (-) or (+) button to select Yes, and press the OK button.

The machine starts printing documents in the memory one by one.

(4) Use the (-) or (+) button to select Yes



To keep the document in the memory, select No.

(5) Press the OK button.

• The deletion confirmation screen will appear each time after one document is printed. Repeat the same procedure until all documents are printed.

Pretty sure your paper tray button is set to get paper from the bottom paper cassette which is the tray that slides into the bottom of the printer.

If you switch the paper tray selection button* to use the rear feed tray you'll probably find it will print faxes sucessfully or you can put paper in the cassette tray...



*The paper tray selection button is just under (and slightly right of) the "Memory Card" button and has an icon image of the printer with two LED's (top and bottom). These lights indicate which of the trays is currently selected...


Hope that helps.

When it has no paper then your all incoming fax documents save memory,Insert paper in cassette box and press start key or memory check button.

I couldn't find anything specific to delete the memory without actually printing it,

here's a copy of the manual if you need it:

http://pdf.textfiles.com/manuals/FAXMACHINES/Panasonic%20KX-FHD331%20Plain%20Paper%20Fax.pdf

Many fax machines have little internal buffer memory and the memory serves to receive a paket of signals which arrive faster than can be printed but when it is full, it may pause so the printing portion can catch up.

Check your manual for the phrase 'buffer memory' to see if they discuss why and when this might happen.

It's possible that the machine is still on line and has just paused waiting for the buffer to reduce its contents.

How i can delete fax HP LaserJet 3050 memory?

Power the machine off overnight when your not using it. The machine will lose the faxes in memory when the battery back up runs out.

here is the manual

http://www.retrevo.com/s/panasonic+kx+fhd331+manual

Check cassette means the paper feed tray. Pull out the paper tray, put in fresh paper. Close the paper tray and see if it starts to print. If not, let me know Ed