Why the lid locking led is blinking after lock the lid and stay standby with out working ?

SOURCE: lid locked no power

use a screwdriver in the crevice beneath the lid. Approx 4 inches from each side you will see a 1" silver piece of metal, push the tab towards the back of the machine. Once you get one side loose place something such as a screwdriver to keep it unlatched until you get the other side loose. The top should come open. And there is also a service book inside your washing machine, I fixed mine myself. Look at my other postings. Good luck!!

SOURCE: Washing machine door lock problem

Just try to check the door latch device. Be sure that the latch is not bound or sticking in any way .This problem with a lot of machines and it almost always was the door lock latch assembly. It has a switch inside it that pauses or stops the cycle if the door is not closed properly, when this switch malfunctions then it will pause or stop the cycle repeatedly; just from the small movement of the wash cycle. The door will actually be shut all the way and the lock may be on. You must replaced this switch so it works normal again..
Just click for the spare parts site link;
http://www.repairclinic.com/SmartSearch/SmartSearch.aspx

Hope it may help you;
Regards,
VOTIT

SOURCE: The lid will not lock on my Whirlpool Cabrio

id change the door switch

SOURCE: Lid lock

yes - simply jumper the two wires on the switch (chassis side).
the part on the lid is actually a magnet.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

SOURCE: lid lock stays on and constant beep on excellence washing machine

i have the problem when i turn power on 2 green wash cycle lights plus the red lid lock stay on with constant beeping every second then when i push the start button the 2 green lights go out and the red lid lock light stays on but no beeps please help