Trying to scan, al it does is bring up Muvee

If you only scan your photo to your printer no need to used inks for that...just click the scan icon witch located in your pc...thanks

It seems to be a problem with your print head. Try to clean the head if it's not a paper jam. See the error codes and the explanations here: http://welcome.solutions.brother.com/BSC/public/us/us/en/faq/faq/000000/000100/000068/faq000168_003.html?reg=us&c=us&lang=en&prod=mfc240c_all

You can download the manual from the manufacturer's web site at
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp460#BrochuresAndManuals

the problem is hardware, try to bring it to the service center.

you need to in stall the drivers on your computer for the printer. and make sure you phone is not connected to the printer at the time you are trying to use it with your computer as this can cause problems to.

If you need further help, reach me via phone at https://www.6ya.com/expert/mark_445a24324be9eb03

try reinstalling it.

My printer does the same. And it's my third Canon printer and ever time when I try to scan a picture or etc. it just ends up saying that the printer can't communicate or that it's shut off. :(

Allow the box to re-scan. when prompted to 'save' new chans select 'no' and 'ok'

This will produce your prior scan results with all the progs.

You may have to do this each time you bring it out of stand-by, but only takes a few mins.

Let me know how you get on at [email protected]

Regards, Chris Hewson.

hi i am a certified Canon repair tech for this printer. if you follow the link below this will take you to Canons support site where you can download the software for your printer. hope this helps

http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

are you pressing ok on the printer? all of your scanning should be done via the MP460 navigator. check your applications under the Canon Utlitiy and click on the MP460 Navigator button. scanning needs to be done via that - not the actual printer. refer to the dialogue box when you are on the MP460 navigator. lower left area has a Save bar, when you click on it tow options: save to PC or save as PDF.