The pump seemed to work fine. About 2 min after stopping the pump it started again on its own. I shut off the breaker and turned it on again and it seemed fine for another 5-10 min. then it started again.
This sounds as if a relay has gone out on the circuit board. There really could be no other reason for the pump to come on without pushing the button.
You will need the model number of the control box so you can find a replacement.
Rod
US Parts Center
SOURCE: My Jacuzzi jetted tub has stopped working.
other than your switch , it could only be the moter or connection to it. always make sure you have enough water in the tub before turning it on or you'll ruin it.
SOURCE: I hooked up a Jacuzzi bathtub and pump won't stay on
I bought a new house and I have a jacuzzi bathtube . and all the sudden stopped working .. where or how I can locate the pumpe ? the only thing I see is the button to turn it on or off and now it does'nt go on ?!! I checked the circute praker and everything seems okay to me.... help please.
SOURCE: I have a kohler bath jet tub. When I push the
Did you try an electric motor rebuilder? $500 seems too high to repair a motor. Motors have either a capacitor or dual windings to get them started and it sounds like yours has failed. Get the numbers off the MOTOR and call a motor rebuilder in your area for pricing.
Gary
SOURCE: I have a Royal Whirlpool
You have a bad neumatic switch. Or a small hole in the air line. Try pushing the button fast and hard to see if it will stay on. if so , it is a hole in the tube. if not it is your neumatic switch
Testimonial: "perfect! Thanks for your help"
SOURCE: My MAAX jacuzzi runs on its own. After it is shut
Power switch appears to have a short in it. See the dealer you purchased the tub from and have them install the part.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/don_e04c7d10037aa2ce
170 views
Usually answered in minutes!
×