20 Most Recent Frigidaire GLTR1670A Front Load Washer - Page 2 Questions & Answers

0helpful
1answer

Frigidaire front loader washer

one of the welds on your inner stainless steal tub may have broke causing the drop of your tub.  The tub has a warranty on it but the labor to put it in is around 3hrs give or take any hour.
11/10/2012 8:06:19 PM • Frigidaire... • Answered on Nov 10, 2012
0helpful
1answer

Frigidaire LTF530FS0 front loader loud, screeching noise

Hi - Try to rotate the drum when it is not in use, manually and see if you notice the sound as well. If you do the drum is not balanced and you would need a professional technician to diagnose the bearing and pulley system behind the drum for repairs.
10/23/2012 5:51:52 PM • Frigidaire... • Answered on Oct 23, 2012
0helpful
1answer

How do I change the bearings in a front load washer

Have you seen this nice video from Espares? If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
8/4/2012 7:45:54 PM • Frigidaire... • Answered on Aug 04, 2012
0helpful
1answer

Front load wont start just makes a humming noise

Most likely the belt's broken - you'll have to get an engineer unles you know how to do it.
2/26/2012 10:22:14 PM • Frigidaire... • Answered on Feb 26, 2012
0helpful
7answers

Odor front load washer

What is the mater with us that we are accepting this outrageous product flaw?

Let's put the blame exactly where it belongs and keep it there until manufacturers clean up their act!

What in the world are we thinking when we allow ourselves to be forced to jump through these ridiculous hoops just do do laundry!?

I am furious and it is over something as stupid as a washing machine! A WASHING MACHINE!!!!

New government regulations for new water efficiency washing machines has my family’s clothing smelling like a stinking, rancid, moldy basement! This is absolutely absurd! I have been told to change laundry detergent, run hot bleach water through my washer and, get this; my washing machine is 1 year old and my clothes smell filthy!!! The mold and mildew from these nasty machines have wreaked havoc through skin rashes and allergies in my children!

I paid $1,000.000 for this da*ned washing machine and THIS is what is being sold to the public under the disguise of efficiency!!?? I have been on the phone about this problem. I have, over the past 3 months, with a technician on the phone, been instructed to do the following:

*Make sure I use high efficiency detergent THAT will fix my problem.
Wrong.
*Cleaned the lint trap (..that is stupidly behind a metal access plate that you have to use a screwdriver to remove screws to get to it EVERY TIME) and THAT will fix my problem.
Wrong!
*Cleaned the water hoses; THAT will fix my problem.
Wrong!
*Cleaned the gasket around the door. THAT will fix my problem
Wrong!
*Cleaned the tub with bleach water. THAT will fix my problem.
WRONG!
*REMOVED the hoses and cleaned the pump. THAT will fix my problem.
WRONG AGAIN!
*Take the pump out entirely and clean all inlet, outlets and hoses. THAT will fix my problem.
WRONG! WRONG!! WRONG!!!

NONE of this fixed my problem of filthy, wet, stinking, rancid clothing that has endangered my family's health! I even washed my children's clothing out by hand in the bathtub and put them in the washer just to rinse and spin and they STILL smelled horrific.

Finally, at the end of my rope, I returned to the appliance store from which I purchased this machine and they have told me that they cannot accept a return. They will not accept a return and I have to deal directly with GE. I HAVE dealt with GE up until the final straw when I they told me I needed a new pump, but so sorry, your warranty JUST expired 3 days ago!!!

Furthermore, my pump was fine. I did NOT need a new pump and have now been told that I cannot return the new, unused pump that cost me another $183.00. I have now been told that this is a problem with ALL front loading washing machines and I should do the following:

*First, run a full complete wash cycle on hottest setting containing Bleach – * Note: wash cycle takes 1 hour and 20 minutes
*Next, run a full wash cycle on hottest setting using high efficiency laundry detergent for another 1 hour and 20 minutes
*Next, run a full wash cycle on hottest setting using Cascade automatic dish washing detergent for an ADDITIONAL 1 hour and 20 minutes
*Next, using Bleach water, wipe down entire interior of washing machine
*Next, using clean white cloth, wipe entire interior of washing machine dry
*Next, leave door ajar to air out machine

*Finally, I have now been informed that I cannot use fabric softener in the machine even though there is a fabric softener dispenser right in the machine because the new front loading machines cannot handle fabric softener!!

Furthermore, I was told that this is new technology and since it is so new, no one really knew these kinds of problems were going to manifest themselves and I just need to try to work with these problems because it is not the manufacturers fault but the GOVERNMENT’S fault! Sorry.

Are you kidding me??

Now I have a $1000.00 piece of junk that the appliance companies are pawning off on unsuspecting consumers and hiding their horrible designs by blaming the government.

So, now this is what I want!

I want the legislature to force manufacturers to properly inform the public of these problems and those who did NOT inform consumers of these issues, COMPENSATE their customers for the $$$$$ it has cost us and the misery and frustration caused by THEIR neglect by NOT informing the consumers of these issues. I want this to be retroactive BACK to at least the year 2005. Furthermore, I want compensated for the cost of buying a top loading washing machine in an effort to keep our families away from the mold and mildew and filthy mess this has caused! Finally, I want manufacturers to own up to the fact that they disregarded the health and safety of consumers in their efforts to profit as much as possible while touting efficiency.

Now I have heard that they have a new 'product' they can sell to us to inhibit the stench of mold and mildew. This is absolutely unacceptable!

This is outrageous and we need to speak out about this and make sure our voices are heard!
10/21/2011 7:48:26 PM • Frigidaire... • Answered on Oct 21, 2011
0helpful
1answer

Starts Banging really ******* spin

Hi,
When my washer did that, I found that the shocks that hold the tub were bad...

Check out this tip I wrote about the noise and vibration that front loadwashers can make..

Washer Problems Washer noise when spinning
heatman101
8/13/2011 8:57:18 PM • Frigidaire... • Answered on Aug 13, 2011
0helpful
1answer

How Can I Obtain A Service Manual To Replace The

You will have to replace the entire outer tub. I have posted a link to the service manual as well as the tub from the least expensive parts retailer. This job will require two people and about 2-3 hours.

Service Manual

Tub

Kelly
3/21/2011 10:04:56 PM • Frigidaire... • Answered on Mar 21, 2011
0helpful
1answer

The washer clicks but does

The motor coupler is broken. It's the part on the end of the motor shaft whcih connects the motor to the transmission. The clilcking is the broken motor coupler pieces colliding with each other. More info, please let me know.

Charlie
2/25/2011 9:36:47 PM • Frigidaire... • Answered on Feb 25, 2011
0helpful
1answer

Mold in the rubber facing -- how can I remove it?

Hiya, have you tried Affresh? Use it once a month and you will be all set.

http://www.boscovs.com/StoreFrontWeb/Product.bos?rch=Y&quantity=1&itemNumber=45251

If you have anymore questions please feel free to ask, Rich.
1/20/2011 6:56:54 PM • Frigidaire... • Answered on Jan 20, 2011
0helpful
1answer

It seems to wash, but

Can you hear the water pump out of the machine. It makes a difference on what to check and I don't you to waste time for nothing.

Let me know
1/10/2011 5:10:52 AM • Frigidaire... • Answered on Jan 10, 2011
0helpful
1answer

IT IS NOT SPINNING THE

You have two situation. One the water is not being pumped out and second the tub is not spinning fast enough to extract the water from the clothes. The latter could be due to a transmission problem and the belt is either loose or worn out. Good Luck
1/9/2011 5:59:00 PM • Frigidaire... • Answered on Jan 09, 2011
0helpful
1answer

Fridgidaire gallery front load washer doesnt spin

sounds like the belt that goes around the drum has come off the pulley or belt has broken you should be able to look under it to see the belt is on or off. hope this helps you.
12/13/2010 6:23:13 PM • Frigidaire... • Answered on Dec 13, 2010
0helpful
1answer

My frigidaire gltr1670a washer is making a banging

It sounds like the spider arm supports in your washer has failed. The spider arms hold the stainless steel wash drum to the axle. You need to stop using the machine immediately since the wash drum is flopping around the plastic tub. It is an expensive fix. The replacement drum/spider can cost over $300 with shipping. Get a few estimates before deciding whether to repair or replace. Sorry.
12/9/2010 3:02:02 AM • Frigidaire... • Answered on Dec 09, 2010
Not finding what you are looking for?
Frigidaire GLTR1670A Front Load Washer Logo

174 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Frigidaire Washing Machines

  • Frigidaire Washing Machines

Most Popular Question

video showing balance front load washer

  • Washing Machines
Loading...