20 Most Recent Frigidaire GLTF2940ES Front Load Washer Questions & Answers


Hey friend, thank you for the post!

I see you are getting an 18h code on your front load washer. Normally any error code would have the letter E or F in it. I would suggest that stands for 18 hour delay start cycle, you could do a reset on your washer by disconnecting power to it or turning off the household circuit breaker for ten minutes and turning it back on. Hope this information is helpful. -Matt

Frigidaire... | Answered on Aug 22, 2018


you will need to unplug the machine and take off the back panel and look for a small 5mm pipe leading upwards, take it off and blow gently into it you should hear a click and another one when you let the air out again if so then the small pipe where you took it from is blocked preventing the switch to work properly , unblock the pipe with a pipe cleaner or metal rod its normally full of soap goo return the pipe and close the back up and run the machine again eric

Frigidaire... | Answered on Jan 17, 2018


if you send me the diagram I can possibly give you the answer, as normally there is the driver pcb to consider or I will find you the best way to do it, please ask the web site for my email address as I don't know if Im allowed to publish it on this answer eric

Frigidaire... | Answered on Jan 17, 2018


It is replaced from the rear of the drum, beneath the pulley.
You need a bearing puller tool and some common sense.
Take photos as you work, that aids reassembly.

Frigidaire... | Answered on Jan 06, 2018


frigidaire has problems with their computer boards and it sounds like this is your problem,i've seen them shut down and then after a while start beeping on it's own just like your machine is doing and it was the board part 137006000

Frigidaire... | Answered on Dec 05, 2017


Call Frigidaire and keep asking for someone higher up until you get results.

Frigidaire... | Answered on Nov 07, 2017


Motor has some shorted windings. Timer switches to higher current for faster rotation and the thermal overload protection shuts the process off as the current is too high because of the shorted windings.

Frigidaire... | Answered on Oct 04, 2017


You bought them in 2009 and it's 2017. That's 8 years later.

Frigidaire... | Answered on Aug 09, 2017


Grit in the inlet water valve.

Frigidaire... | Answered on Jun 30, 2017

Not finding what you are looking for?
Frigidaire GLTF2940ES Front Load Washer Logo

1,216 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1479 Answers

J. Bradshaw

Level 2 Expert

121 Answers

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Frigidaire Washing Machines

  • Frigidaire Washing Machines

Most Popular Question

fix washer from stopping early not

  • Washing Machines
Loading...