20 Most Recent Frigidaire Gallery GLEFM397DS Electric Kitchen Range - Page 7 Questions & Answers


Shorted touchpad. Try unplugging for 5 minutes to see if it will reset

Frigidaire... | Answered on Dec 21, 2018


just started 6 weeks ago and I've gotten 2 check for a total of $2,200...this is the best decision I made in a long time! "Thank you for giving me this extraordinary opportunity to make extra money from home. This extra cash has changed my life in so many ways, thank you!" Visit site:: SalaryHD­­.­­C­­o­­m

Frigidaire... | Answered on Dec 03, 2018


Do not use the self clean, it gets the oven way too hot and the oven won't work while it is cleaning. On our oven we put a piece of black electrical tape over the self clean button and told everyone in the household to not use it ever.

Frigidaire... | Answered on Nov 19, 2018


The most likely cause on an electric range is a bad connection on an element, but this unit is gas. It does have a fan assisted oven and a burned out fan is the most likely reason.

https://www.reliableparts.ca/lookup/110541

Model plgf389aca Frigidaire GAS RANGE Parts

Frigidaire... | Answered on Nov 19, 2018



The F31 error code means that the control board detects the oven temperature probe circuit is shorted. If the sensor tests good, then you could have a bad control board or a short in the wiring.

Frigidaire... | Answered on Nov 15, 2018


There are screens under front of top just above door. Remove those and top should lift up and remove

Frigidaire... | Answered on Nov 09, 2018


tilt out to the partial open hold spot the LIFT the door off the hinges .

Frigidaire... | Answered on Oct 21, 2018


f14 Looks like a keypad problem.
First remove power for 10 minutes or so and then give it a try. This may reset the board.
If this does nothing.
Disconnect the unit from power, unplug the keypad at the control board and clean the connectors then reconnect it and give it a try.
Use electronics cleaner or isopropyl alcohol and a tooth brush to clean them. Just make sure all the solvent has evaporated before reconnecting.
If the ribbon cable is the type where just the insulation is removed (no connector) the contacts can be cleaned with a pencil eraser. Do not use an ink eraser as iit is too abrasive.
If this does nothing
Check it with a meter as shown in the tech sheet to confirm it is shot.
If it is OK then the problem is probably on the control board itself. __________________

Here is the link to the pdf test sheet mentioned above.
http://manuals.frigidaire.com/prodinfo_pdf/Springfield/316904001.pdf

Frigidaire... | Answered on Oct 09, 2018


Try turning breaker off for 2 minutes then back on. That may clear the code. Top elements should work independently of oven control

Frigidaire... | Answered on Sep 20, 2018


What is the model number please

Frigidaire... | Answered on Sep 04, 2018


Make sure there is power present at the socket.
If not then the wire must have bad connector some where between the socket to the switch or may be the switch itself is defect.
If yes, there is power at the socket then make sure the center touch the end of the bulb.

Good luck

Mai

Frigidaire... | Answered on Aug 15, 2018

Not finding what you are looking for?
Frigidaire Gallery GLEFM397DS Electric Kitchen Range Logo

137 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts

Ismael Rodriguez...

Level 2 Expert

184 Answers

Paul Carew

Level 3 Expert

3428 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Frigidaire Kitchen Ranges

  • Frigidaire Kitchen Ranges

Most Popular Question

frigidaire gallery glass stove top

  • Kitchen Ranges
Loading...