Top 20
Frigidaire Gallery GLEFM397DS Electric Kitchen Range Questions & Answers
One burner doesn't light up
Sylvain, Probably a burner coil or connector is probably faulty. Have checked and replaced.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
2/28/2016 2:54:27 PM •
Frigidaire...
•
51 views • 0 helpful votes
Frigidaire digital clock on electric stove keeps shutting off
I appreciate your inquiry, friend!
I see that you are having an issue with your digital clock shutting off on your Frigidaire range. This could be a potential short within you wiring harness or control panel. I would recommend performing a reset on your range and you can do that by disconnecting power from your range for roughly ten minutes. If that does not correct your issue you may need to have an electrical component replaced and that is not a simple DIY job. I would suggest having a professional technician out to perform a proper diagnosis and repair. This will help you avoid any unnecessary part purchases. -Matt
3/7/2015 9:52:55 PM •
Frigidaire...
•
1,313 views • 0 helpful votes
Why do my top burners do not work, but oven and inicator lights and clock work
Good Afternoon Friend, this is Z. I am happy to assist you!
I understand the burners on your Frigidaire range are working, however you are having trouble with your oven. Do you have an electric or gas range? Can you elaborate prior to your problems any other symptoms or specific error codes before having this issue? Also, may I have your model number please? The serial tag, which lists your model number, is typically located in the storage drawer, on the right side. With this information I can assist you better in pinpointing the problem. Thank you!
7/13/2014 5:36:45 PM •
Frigidaire...
•
84 views • 0 helpful votes
Frigidaire stove front large/small burner
This is a inner/outer burner type assembly? Sounds like a glass top.Either way, your switch for that burner or the burner needs to be replaced.If you are able and it is possible, inter change switches to see if it makes a difference. Interchange Large with large, small with small.If yous switches are connected as one unit, you will not be able to do this. Sorry, I have not looked up your wiring diagram.
10/23/2013 4:59:40 PM •
Frigidaire...
•
316 views • 0 helpful votes
LOCK CONTROL APEAR AND NOT WORKING AT ALL
Good Morning Mike, I am happy to assist you!
I understand the oven lockout feature is activated on your
range. Try pressing and holding the LOCK symbol for approximately five seconds.
A beep will sound and LOC will clear. The "DOOR LOCKED" will continue to flash
until the oven door has completely unlocked. Your range should resume normal
operations. I ask that you please follow up with a comment on the post, at your
convenience to advise if further troubleshooting is needed or if your range
status has changed successfully. Thank you!
11/7/2013 5:34:16 PM •
Frigidaire...
•
81 views • 0 helpful votes
Frigidaire gallery professional series oven I have
Good Afternoon John, I am happy to assist you!
I understand you are seeking a manual and I'm assuming your
model number is GLEFM397DS, posted above. If so, I have located the
Owner's Guide on the manufacturer website. Here you will be able to access step by step
instructions on how to operate the oven. I hope this information helps to some
degree. If there is anything else that I can help you with, please feel free to
reconnect!
9/16/2013 12:09:40 AM •
Frigidaire...
•
223 views • 0 helpful votes
I have a frigidaire gallery glass stove top that
Good Morning Sandy, thank you for allowing me to assist you!
I understand you are seeking information regarding the self-clean
feature for your above-listed range model number, GLEFM397DS. I have located
the Owner's Guide on the
manufacturer website and you will find step by step
instructions on how to do so from pages 32 through 34. Hope this proves
helpful! If you have further questions, please do not hesitate to reconnect.
9/25/2013 11:15:14 PM •
Frigidaire...
•
167 views • 1 helpful votes
I have a frigidaire gas range model FGF379WECG,
Good Afternoon Donna, thank you for your post!
Let's try resetting your range by either unplugging it or
flipping the household circuit breaker off. It is important to wait
approximately ten minutes and then turn the unit on. Is the unit still advising that the door is locked? An experienced
service technician may need to further evaluate this issue if it was not
resolved with the power reset. In this case, your unit may possibly be
experiencing a communication problem with the EOC (Electronic Oven Control) and
door latch assembly, or a potential wiring failure.
9/29/2013 2:06:11 PM •
Frigidaire...
•
110 views • 0 helpful votes
Adjust oven door
Hi Jeff - Thank you for your question and I
understand that you are seeking information on how to adjust the oven door.
However, more than likely the hinges would either need to be loosen/tighten or
replace depending if they are too damaged. The weight of
some range doors and how they are closed can wear over time. Personally, I would recommend contacting
the manufacturer to see if they have any updated or alternate door hinges that
you can install yourself since this can be a complicate job.
6/6/2013 10:26:40 PM •
Frigidaire...
•
728 views • 0 helpful votes
HOW DO I TAKE BOOTOM BURNER OUT FRIDIDAIRE GALLERY CFES 388REB1
Hello rdbal - Most bake and broiler elements are typically held into place with 4-6 screws or fit(s) in a bracket like connection and then needs to be screwed down. However every unit is different so please contact a professional to move accurately for more information due to safety and liability reasons.
11/11/2012 9:23:48 PM •
Frigidaire...
•
79 views • 0 helpful votes
No heat from burners or oven after relocating stove
Hi Ron - From what you have described if neither the burners nor oven turns on make sure the electrical connecting is 240V. The oven light and clock portions only required 115V. The clock and oven light working may indicate an electrical circuit breaker supplying the range is tripped or a fuse is blown. Confirm household circuit is correct and the range cord is properly wired to the terminal block.
9/16/2012 8:59:25 PM •
Frigidaire...
•
282 views • 0 helpful votes
I have a frigidaire gallery stove.I need a
Hello,
According to the Frigidaire website the place in Canada where parts can be obtained from is
Frigidiare Parts& Service
7075 Ordan Dr.
Mississauga,Onterio L5T 1K6
Tel# 905-565-9200
GENE
9/22/2011 2:54:33 PM •
Frigidaire...
•
290 views • 0 helpful votes
F3 flashing on display
Hello,
The F3 error code means the the oven tempature sensor has shorted out and the sensor needs to be replaced. This is what the sensor looks like
To check that it is shorted,unplug it and place meter leads at the plug on the end of it and see if the display on your meter shows
0.00 ohms of resistiance...if it does the sensor indeed has shorted out,a good normally working sensor shouls have a reading of between 1060-1100 ohms resistiance at room temp. a reading of ZERO means that the sensor has shorted and needs to be replaced. the part number for the sensor is 316490001 it could be purchased at your local appliance parts store or online at;
searspartsdirect.com
repairclinic.com
apdepot.com
partselect.com
apwagner.com
GENE
9/5/2011 12:41:00 AM •
Frigidaire...
•
179 views • 0 helpful votes
How do I chance the
Press clock button, then press temperature up button. Time will begin to change. When you have the correct time set, press the clock button again to save.
3/13/2011 12:10:09 PM •
Frigidaire...
•
584 views • 0 helpful votes
Not finding what you are looking for?