20 Most Recent
Maytag Neptune MAH5500B Front Load Washer - Page 8 Questions & Answers
If you get the FL how do you get the door to
-
Your Maytag
Neptune washing machine displays error codes, also called "help codes,"
to identify specific problems with your washer. Once you close your
Maytag Neptune's door, the machine locks the door, goes through the
selected wash cycles and unlocks the door when the laundry is finished.
Error codes appear when there are problems with the door, the inflow and
drainage of water and the motor.
Do
-
Your Maytag Neptune washer displays the "do" help code when the washing machine
is trying to start a cycle, but the door is open or not locked
properly. If this message is displayed, close the door securely and
restart the washing cycle.
FL
-
The "FL" code indicates that the washing machine was unable to
lock the door after you closed it. Open and close the door tightly, then
restart the washing cycle.
Sd
-
The "Sd" code indicates that you have added too much detergent to
the washing machine and your laundry has too many suds. The machine
will stop displaying this code if it has successfully run the suds
recovery cycle, which removes the excess suds from the wash load. If the
code remains, reduce the amount of detergent in the load. Use less
detergent for similar loads of laundry in the future.
PF
-
The "PF" code indicates that a power failure has occurred.
Restart the wash cycle. If the code still appears, check that the
washing machine is still plugged in to the electrical outlet.
Nd
-
The "nd" code indicates that your Maytag Neptune is not draining
as it should. Check that the drain hose isn't kinked and that the stand
pipe isn't clogged. If you find either of these problems, fix them
before restarting the washing cycle.
LO
-
The "LO" code appears when the washing machine has finished the
selected wash cycle, but cannot unlock the door. Verify that the door is
closed properly, push the "Off" button, and wait two minutes. The door
should unlock and the error code will disappear. If the error code
remains, unplug the washing machine, wait two minutes and plug it back
into the electrical outlet.
Lr
-
The "Lr" code indicates that the washing machine's motor is not
running as it should. Have your Maytag Neptune washing machine serviced
by a certified Maytag repair professional.
Standing water in the barrel
Unfortunatly this is normal for the neptune washers and there is no solution other than to use the machine often so the water does not stagnate.
How do I get to the barrel of my maytag neptune washer?
Barrel ? The inner spin basket or the outer tub ? Both require a lot of work. But everything has be removed, disconnected and or replaced. Front panel, door, rear panel, pulley, belt, flip up the top, all hoses and harnesses, top and bottom, front tub cover, bellows, un lip from the outer tub, cement block for weight, shocks on bottom and springs on top !
Ny front load neptune washer comes to the spin cycle and the door unlocks and it won't spin or empty the water. Is it the inlet valve? Or what?
Janie,
It sounds like your evacuation pump is clogged, and needs cleaning or needs to be replaced. Some front loaders have a clean out in the front lower left of the machine 's cabinet. You'd need to check with your mfg owners manual to see if your model has a clean out for the evacuation pump which pumps the water out of the machine.
Old rubberized bathroom carpets, and other fraying items like towels torn into rags, can lose enough material to clog up the pump impeller or freeze it until the motor burns out trying to turn against a bunch of foreign materials like these.
It's a nice washer and worth the repair and note of caution once you get it fixed.
Cheers,
Kelly
Commercial and Residential Facility/Property Manager
San Diego, CA
Water coming out of the back of the dryer
When a dryer usually produces visable water from any part of it's self, the suggestion would be a completely restricted vent line. Such restrictions could be from nests from animals, excess lint, a dip in the vent hose causing lint and water to collect. Since the dryer is leaking water, it is heating and therefore creting steam in an effort to dry the cloths, with a clogged vent the steam has no where to escape to and thus condenses within the dryer and leaks out. The vent needs to be checked by a wualified vent servicing company from the back of the dryer to the point of exit of the home. Pleazer Appliance...
When I push "Start" on my Maytag Neptune front load combo, it lights up, the door locks, then it starts filling and after few secs it cuts off, what can I do?
If this is a combination washer dryer (model number starts with MLE). First disconnect the power to the unit and locate the main control board located on the top right hand corner. You can remove the two 5/16 screws holding the top of the front panel and move the front panel forward to remove the other two 5/16 screws holding the front of the top panel. Once these are removed there is one more 5/16 screw holding the board in place, remove the screw. Now lift the top panel and pull out the board with the wire harness. Search for the resistor R11 on the board (it's towards the middle). If this resistor is burnt, replace the main board and the wax motor located inside the latch mechanism ( it will have a red/burgundy color plunger which will be replaced with a wax motor with a black plunger). If R11 is intact, look closely at the latch system, and replace it if needed.
When the door is closed, none of the buttons seem to work as expected
bad contacts
or fluid on the controller board
everything needs plugged off and plugged back in
the machine has been expossed to below -13deg c
and the joints metals tins arent the right type any more
look up white and gray tin and where it changes state
in google
around -13 too -20deg
after this the machine will have issue like multi fail
just need to unplug and replug all contact plugs
sockets
try again
then post....
Power Washer Engine Locked Up
Maytag Neptune MAH5500B Front Load Washer
Power Washer Engine Locked Up
Hi, My husband said there was... Answer This...
YOUR POWER WASH CAME UP UNDER NEPTUNE WASHERS????????????????????????
Not finding what you are looking for?