Bosch Refrigerators - Recent Questions, Troubleshooting & Support


As the fridge is still new and presumably under warranty, if the remedy to the problem isn't to be found in the manual, your next call should be to inform the supplier of the problem and ask for a solution.
Your contract is not with the manufacturer but with the retailer/supplier and in return for a parcel of money you have the right to expect a fridge that doesn't beep and does keep the contents cold and remains trouble-free for a reasonable time.

Bosch... | Answered on Dec 01, 2019


Google (bosch)(FD8903)(manual) without parens OR contact Bosch directly to request.

Bosch... | Answered on Nov 28, 2019


Hi,

Do you see a button called alarm/lock?

Press and HOLD that button for five seconds.If that does not work,Press and hold super and freezer buttons at the same time for five seconds.This would change the IWD off message.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Bosch B22CS80SNS... | Answered on Nov 17, 2019


Hi,
This is most likely a blocked drain pipe - blocked with ice that is.

Remove all the drawers in the freezer - and stack them up.
With the unit switched off and unplugged, undo the fixings on the rear pannel in the freezer (behind the drawers)
Remove it to see the evaporator coils etc.
At the base there should be a channel - and a hole leading to the drain pipe. This needs unblocking wih a thin flexible cable. -net curtain support wire is ideal, and cheap. or use a short length of insulated cable.
Check it comes out at the rear of the unit onto the evaporator container - situated on top ofthe compressor.
Replace everything and switch on.

Bosch Classixx... | Answered on Aug 29, 2019


The diverter valve usually has a coil on it to open or close it. The valve may be sticking. ??

Bosch... | Answered on Jun 16, 2019


Typically that'd be where they are..you should see the openings in the back of the freezer and the fridge...barring any obstructions sounds like a computer board issue

Bosch... | Answered on May 31, 2019


The "hyphen". The switch is marked 0 for off and 1 for on (binary notation).

Bosch... | Answered on May 30, 2019

Not finding what you are looking for?
Bosch Logo

1,164 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

Are you a Bosch Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...