I need a manual to reset the projection. - La Crosse Atomic Projection Alarm Clock In Temp Wt5110

The lamp time reset will be or should be in the owner manual---Google the model number with keywords "lamp install" with the model number and the "manual" with the model number---Google can be a great help.

The User manual explain this case.

If you do not have owner manual Google the model number with "manual" to get it.

You can also Google the model for "lamp timer reset", These sets I have worked on but never needed to reset the timer.

I can email you the user manual for your model if you want to send a email to me at [email protected]

you need to go into the TV's menu and select replace projection lamp menu and follow the on screen instructions to verify and reset the lamp timer, (its in your instruction manual , in detail) , i am awaiting a new phillips bulb for mine, as i always use the original enclosure, no need for extra plastic, and its easy to complete the swap, and reset hours via TV menu

according to the owners manual you need to go into setup in the main menu and scroll down to timers or lamp reset then hit the rest button

Usually in the back part of the manual are instructions on how to reset it.

You will need to reset your v-chip, refer to your manual for exact instructions if you do not know the code, or call RCA to get it reset.

You can get one at the following link.
http://servicemanuals.vstore.ca/

Good Day;

You need to repair TV, sounds like you a convergence problem, but try this THE CONVERGENCE CAN BE RESET BY PRESSING "MENU 12598970", IF THIS DOES NOT RESET THE CONVERGENCE TRY "MENU 125968970"

Good Luck, big IRISH.