I need a page count for a xerox 3200
SOURCE: Xerox Phaser 6100 BD
It should be on the start up or configuration page.
I know there is no info in any documentation that tells you where to gain that info.
I can't remember exactly what page it is on, but the count is on one of those 2 pages.
SOURCE: reset page count
Hi bseema:
Hope that this helps you.
Resetting Fuser Life
This procedure restarts the counter that tracks Fuser life. Perform this procedure after
you install a new Maintenance Kit.
To reset the fuser:
1. From the Main Menu, select Information, then press the OK button.
2. Select Supplies Info, then press the OK button.
3. Select Reset Fuser Life, then press the OK button.
4. Select Reset Fuser Life NOW, then press the OK button to reset the fuser life
SOURCE: Xerox Phaser 8560
On the right side of the machine. There is an encoder mounted to the end of the drum shaft. They are known to become contaminated with the silicon lubricant from the maintenance kit. That causes the drum to spin off speed somewhat randomly. You can take it off the shaft and clean it well with alcohol. Sometimes they need replaced, but if it is as intermittent as you are suggesting cleaning it should take care of your problem. Not all that uncommon.
here is the link for the xerox website for vista drivers.
http://www.support.xerox.com/go/results.asp?Xlang=en_US&XCntry=USA&prodID=6100&ripId=&Xtype=download
SOURCE: Xerox Phaser 6360N ghosting images on each page
Is it a ghost of the image or just a repeating defect? In the menu, there is a repeating defect information page that you can print out. Depending on the spacing of the defect, you can determine which component it is.
54 views
Usually answered in minutes!
×