20 Most Recent
Xerox WorkCentre M15i Laser Printer Questions & Answers
I need part numbers for
Should be 002N02001 for the Feed Roller Assembly and 22N1487 for the Separation Pad
About $50 total for both parts
Good Luck and Thank You for using Fixya.
WheatlandServices
Xerox WorkCentre M15i will not turn on.
You have 4 bad capacitors on the Power Supply. Replace C24 and C25 (100 microfarad 35v) Replace C12 and C21 (33 microfarad 35 v). It would be a good idea to replace them with a better voltage rating, maybe 50 volt electrolytic capacitors.
My M15i Xerox Workcentre is
Solutions for : Vertical Black Lines on Copies When the Automatic Document Feeder and Document Glass are Used
Solution : Clean the Drum
- Make sure there is paper loaded in the paper tray.
- Press the [Menu / Exit] button on the Control Panel.
- Press the [Up] or [Down] arrow button until 'Maintenance' is displayed on the Display Screen.
- Press the [Enter] button. 'Clean Drum' will be displayed.
- Press the [Enter] button. 'Cleaning Drum Please Wait' will be
displayed and a sheet of paper will be printed. Toner (Dry Ink)
particles on the Drum will be affixed to the paper.
- Repeat steps 1 - 5 until the page prints without any Toner particles.
Will not power up
I have same problem at a customer. But i got here (in fixya) some solution... take out power supply unit,,, in smps, replace two capacitors... c21/c25... i have yet to do it. try it. give feed back. all the best
Not finding what you are looking for?