Office Equipment & Supplies - Recent Questions, Troubleshooting & Support

make & model of the device?

Office Equipment... | Answered 3 hours ago

Lexmark United States Methods for Identifying the IP Address ... > ...

This article provides instructions for obtaining the IP address of the printer. Several methods are outlined as not all printer models offer the same possibilities for ...

Lexmark Office... | Answered 8 hours ago

To cut to the chase, the firmware(system software) nedds to be flashed (downloaded to the device) to version 60.02 or newer. You will need a trained tech, or be an EXTREMELY resourceful and lucky end user as you will need to find the proprietary software and the utility required to establish the link between the copier and your pc/laptop. Wish I had better news but at least you know what you face. Good luck.

Office Equipment... | Answered 11 hours ago

Self Protection Mode.

Probably a cooling fan failure. You need it serviced or fit a new fan.

Confirmed by Viewsonic Q&A

Projector turns on initially but then cycles off
Projectors may shut off for a couple different reasons. If the projector over heats, check to see if there is enough ventilation for air to be circulated around the unit. Make sure fans are running and that there is no obstruction. Let it cool, clear obstructions and check fans when turning the unit back on. After market lamps may cause an issue. This is a very common cause of a projector shutting off after a short time of being turned on. Aftermarket lamps have the same core but do not use the same housing materials. These materials may not dissipate heat as efficiently as the factory housing and cause the lamp to overheat, when this happens the projector will shut off. It is recommended that an original ViewSonic lamp be purchased.

ViewSonic Office... | Answered Yesterday

May be a defective toner cartridge - try a another to find out.

Xerox Office... | Answered Yesterday

Toshiba Office... | Answered Yesterday

I dont believe there is a grand total on that machine.

Casio Office... | Answered 2 days ago

Utility/Counter -> Details -> [STOP][0][0][STOP][0][1]
Go to counter and clear the life of the developer and drums and then run F8 from functions.

Reset your Toners and Imaging units for Minolta Bizhub and CF series.

Konica Minolta... | Answered 2 days ago

Log into the service menu Samsung CLX-3175 without a numeric keypad similar to the unit Samsung SCX-4623F/FN:
Consistent set of combinations of
"MENU" - "COPY ID" - "LEFT" - "RIGHT" - "MENU" - "BACK" . Samsung CLX-3175XX/X with a numpad press: Menu, #1934, Menu
The unit switches to English, if you installed any other.
In the menu appears TECH MODE.
Samsung CLX-3175 to enter the reset require a password 1934. The numbers by pressing "LEFT" - "RIGHT",
After each number press the "OK"

Good luck in the reset.
Have any questions, you here

Samsung... | Answered 2 days ago

This was originally a Samsung printer, and they had plans to release a Linux driver. However after some corporate games it's now owned by Bixolon, and everything Linux has been axed.

Samsung SRP 350... | Answered 2 days ago

download from samsung website,may use foll link:

Samsung Xpress... | Answered 2 days ago

hello friend

in samsung driver cd their have a software SMARTRU that is the driver for scaning function so you have to install this driver.if u didnt found it
go the and download it.

Samsung SCX... | Answered 2 days ago

Not finding what you are looking for?
Office Equipment & Supplies Logo

573,450 questions posted

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts


Level 3 Expert

2239 Answers


Level 3 Expert

13434 Answers


Level 3 Expert

85216 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides