20 Most Recent
Jenn-Air JMC8127DD Microwave Oven - Page 6 Questions & Answers
Repair model 130
Please post your full model number and a more detailed description of your symptoms.Are you saying the keypad fell off the oven?
12/4/2011 4:49:01 PM •
Jenn-Air...
•
Answered
on Dec 04, 2011
My Jenn-air micro/convection oven runs, but
Hi
This means a
loose/broken wire on the oven temp sensor or the oven temp. sensor itself is
bad and should be replaced. To solve this issue test the oven temp. sensor, it
should read between 1080-1120 ohms, if the rating is more then that and the
door appears to be closing fine then it is the control board that is bad and
should be replaced. Hope this helps...please post back for further assistance.
Daniel
9/29/2011 3:52:51 PM •
Jenn-Air...
•
Answered
on Sep 29, 2011
The microwave shut off by
Check it after 2 hrs .By repluging it.
If you use microwave alot then it might get too hot,So just try it.
Otherwise give some more detail to me to trouble shoot it.
Thanks
9/11/2011 1:56:45 AM •
Jenn-Air...
•
Answered
on Sep 11, 2011
Just wondering if I can
On the convection setting it's just a regular fan oven, so you can safely use metal.
7/28/2011 6:16:33 PM •
Jenn-Air...
•
Answered
on Jul 28, 2011
I cannot read the full
Hello,
welcome to Fixya!
The first three characters are in alphabet which is SVE
In other words, the full model number is SVE 47600W
I hope this is clear now.
Regards.
7/12/2011 11:57:38 PM •
Jenn-Air...
•
Answered
on Jul 12, 2011
Won't heat,makes noise, has symbol;
Hello
& Welcome to FixYa
The
problem is with the magnetron or high voltage transformer that is bad and needs
replacement, the sound that you hear will come when the magnetron is bad. Please
get back to me if you have any other questions.
Kevin
7/6/2011 8:36:57 PM •
Jenn-Air...
•
Answered
on Jul 06, 2011
I purchased a house w/
Neither of these are a typical Jenn-Air model number.
http://shared.whirlpoolcorp.com/product_literature/search.jsp?siteCd=JA_EN_US suggests that the model number is on the back wall under the burner on the right side of a drop-in cooktop. For a range the model number is often on the frame inside the oven door, below the vent or on the back of the top of the range.
87946 or 87847 are the part numbers for the cartridges (the elements or the surrounding housing).
Look at the model number locations at the "Help me find my model number" link and try to locate a model number on your range. Then enter that model into the search box. The manual is probably available with the correct part number. Most Jenn-air electric cooktops start with JEC in their model number.
I hope this helps you locate the manual.
Cindy Wells
(I did try JEC87847 just in case you left off the leading alphabetical characters.)
5/8/2011 2:09:41 AM •
Jenn-Air...
•
Answered
on May 08, 2011
Won't heat
If you hear an unusual buzzing noise, the magnetron (the component that actually generates the microwaves) or other electronic module may be broken. This is not easily fixed; contact a service technician.
Quite often this is due to a bad door switch located inside behind the area where the door hooks go into the oven.
Opening the door while cooking (without first hitting the STOP pad) is the primary cause of door switch failure.
I have a text file on my Web site called "doorsw.txt" which helps in diagnosing and repairing door switch problems, and a file called "safety.txt" which is of vital importance.
You can check my profile for the Web link to find them.
In some cases, the problem is a bad connection or a bad relay on the control board. That's something we see from time to time, and we repair those nationwide for $32.50, but it's usually a door switch.
If you still have a problem, please repost with more detail
4/26/2011 2:44:32 PM •
Jenn-Air...
•
Answered
on Apr 26, 2011
My Jenn-aire microwave says locked
Most likely you set a child lock (front panel lock) by holding a button too long (3 seconds). Without a model number, I can't be absolutely sure of the keypad lock for your Jenn-Aire microwave. Usually, the key will have a small padlock icon on it. Press and hold this key. On my microwave you press and hold Start to toggle the lock off.
On a Jenn-Aire JMW2430 and similar models, the Button Lock is activated by a several step process (More and Button Lock). However, pressing and holding the Start button will deactivate it.
I hope this helps.
Cindy Wells
4/19/2011 5:10:44 PM •
Jenn-Air...
•
Answered
on Apr 19, 2011
Not finding what you are looking for?