20 Most Recent Belkin (F5D7230-4) Router (587009) - Page 6 Questions & Answers

Powerdown the PC, router, and modem then start the modem first then the router and finally power-on the computer... That should do it! Hope it helps!

-- Joshua79

Your cloning the mac address - thats the problem. It should use it's own mac address to connect to the modem. You need to power down the modem, then repower after a minute or so to let it connect to the new mac address. The problem you are seeing is due to network collisions betweenj the desktop and the router with the modem.

To secure your wireless network from unauthorized access,please click on this link and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

first the speed has a relation with yout ISP not you router or modem,unles youre tranfers files on a network,home or office.So for todays surfing the way you want you need a broadband connection of at least 2MBS or greater.

If you mean you can't remember your WEP/WPA passcode then that can be fixed by accessing the compute through a lan line (ethernet) and just reconfigure it for a new passcode. If you mean you can't remember the code TO the router then you can always press the reset button on the back of the device for ~5 sec and reset it that way. A lot of standard (factory setting) passcodes are password with a login of admin

Follow this instructions:1. connect via hard wired connection using your PC (network cable)2. open your internet explorer or any browser.3. type the numbers 192.168.1.254 or 192.168.1.1 on the address bar4. you will be routed to your router's settings, type admin for USERNAME: and just leave it blank for PASSWORD.5. look for the basic setup/settings6. look for the wireless settings7. under your SSID comes the WEP or WPA-PSK option8. that is your wi-fi password, then modified it and remember the password you use for you will need to enter it on your pc when you are connecting via wireless connection.you can select ASCII for password. it should be alpha numeric or combination of letters and numbers.9. select save and apply. then you are good to go.thanks for choosing fixya and rate this post.

This link is for Iphone repair, It solved some of my Ipad problems. Hope it works out for you

go here
http://www.belkin.com/support/product/?lid=en&pid=F5D7230-4
Sergio

Do you mean the password for the wireless network or the password for the router. If you don't know the wireless network key or the password then you will need to access the router set up and you will find the wireless password there. If you don't know the password to access the router then you will need to reset the router and reconfigure the router. Click Here for step by step solutions

connect to your router via wifi...
open a web browser and go to http://192.168.1.1

it may ask for a user name and password

user name/ID = admin
password = password or admin or just press enter

then you can administer your router through the web browser. If you need further help, reach me via phone at https://www.6ya.com/expert/jim_8aa10a90cbbc76ff

go to settings and then wifi and make sure that the wifi is turned on. dont know if this will solve your problem but it might

Hello,
If your computer is not properly authenticated to your wireless router or if DHCP is turned off in the router an invalid address or (windows auto configure address of 169.x.x.x) may occur since windows can not find a DHCP server, it assigns its own default address space to your PC.
1. If your PC is connected via wireless make sure you input the correct wep / wpa or wpa2 password. 2. If your PC is connected via cable reboot the router and see if it gets a valid address. If it still doesn't, you may need to reset the router by pressing and holding the reset for min 5 seconds. You may have DHCP disabled which is causing this issue so resetting the router will re-enable that.
Do you have more then one PC connected to your network? Do they all get 169 addresses or just one? If just one has this issue then it could be the network card (try removing it from device manager and reboot the PC so it finds it again and reconfigures it) IF the PC is connected via cable, try another cable. Make sure the PC is connected to a LAN port not a WAN port.
If resetting the router and everything else does nothing, you may need to replace the router.
Chris

No lights on router means no power coming in. Check first if you have any loose ends on the power cord. Try plugging your router to another working power outlet as well. Sometimes, electronic equipments can operate much better if plugged in directly to power outlet than to a surge protector. If all of these doesn't work, then it must be a defective router now.

wep key is composed of a hexa decimal a 10 digit number.

I HAD THE SAME PROBLEM, WITH A BELKIN ROUTER I HAD PURCHASED...MY IP DID NOT ACCEPT THIS TYPE OF ROUTER, AND AS MUCH AS THEY COST AT THE STORES, I FOUND IT CHEAPER TO GO THROUGH MY OWN IINTERNET PROVIDER,..TO GET GET THIER ROUTER AND HAD IT ADDED TO MY BILL, IN (3) SMALL PAYMENTS.

YOU WILL NEED TO CONTACT YOUR INTERNET PROVIDER FOR THIS PROBLEM. THEY MAY NOT ACCEPT (BELKIN)...SURE THE STORE'S WILL TELL YOU DIFFERENT, SO TO GET THERE BONUS...BUT IT'S ALWAYS BEST TO GO THROUGH YOUR IP IF POSSIBLE!

I WOULD TAKE BACK THAT BELKIN ROUTER AND GET YOUR MONEY BACK, AND USE THE MONEY TOWARDS THE ROUTER, THAT YOUR IP ACCEPTS! YOU WILL GET IT IN A MATTER OF (3) DAYS MAX!

HOPE THIS HELPS!

to access the belkin router, you must first connect your laptop directly to the belkin router via ethernet cable. after securing the connection, open a browser and type 192.168.2.1 to access the router page. and just click on log in. then you can start configuring your wireless settings now

You can download the driver here http://www.belkin.com/support/article/?lid=en&pid=f5d7230-4&aid=5096&scid=221

Make the FixYa experience better for everyone by voting.

Hi,

My name is Ben and I'm your guru, i.e., mentor, an influential teacher or popular expert: a management guru. - origin from Sanskrit, 'weighty, grave' for today.

I suggest that you click on the following link and hook up to the largest FREE database on the Internet: Free Driver Downloads

All the best

Ben