Belkin has a great support site and this link here will take you a page where you can download a new manual, firmware updates, and even troubleshooting help with setting up the router with Comcast, Bell South, and Cox cable systems.
Good luck to you.
It's not unheard of for a router to fail. When you connected the computer to the Modem, did you use the same cable that was connected to the router? Does your internet connection require a username and password? If so, is that configured in your modem, or the router? If not in the modem it must be the router.
Losing the Belkin setup cd or software disc is one the most common problem. The best part is that you can install belkin router without cd disc. This process is called belkin web setup. Follow the steps below:1.Open browser in your pc and type 192.168.1.1 an dhit enter.2.Insert username and password given on the bottom of the Belkin router then login.3.Go to Internet settings and choose your internet connection type.4.Enter internet information given by your internet service provider.5.Now go to Wireless and Settings.6.Type SSID name as your wifi name and passphrase as your password.7.Click on Save settings and restart your Bekin router.8.Connect with your new SSID and password.
hi
the router is not giving IP. restart the router to solve the issue.
from ipod delete this wifi network by right click and forget network. connect again.
update me
You may be able to get an external antenna for it; check where the existing antenna connects to see if it can be removed. If not, raising the elevation of the access point will help. Also, be sure to place the access point away from thick walls or metal.
pin number is never put on the unit. if u need a pin number its in the users manual/set up manual if u never changed the origanl pin upon setup. on the back of the router there should be a reset button pn sized of course which will set it back to manufacturers settings which will then take the origanl manufacturers pin number which is in the setup manual
Unplug the router for 10 seconds and again plug in. Sometimes a simple
restart can resolve network problems on a Belkin router.Disable the "Windows Firewall," which might be preventing an outgoing
connection. Click the "Start" menu, type "Windows Firewall" and press
"Enter." Click "Turn Windows Firewall on or off." Click on "Off." Click
"OK." Make sure the router is connected properly to your modem with an Ethernet cable via the router's "WAN" port on the back.Follow the simple steps to set up the Belkin wireless routerIf you need any kind of technical assistance, you can contact support cell at http://www.vtechsquad.com
Go to settings and connection type and check maximum idle time is not highlighted! Sounds like it is timed to disconnect after a time limit from your description!
