Hi, I'm getting codes 136 02 sensor bank 1 sensor 2 along with 301 cylinder 1 misfire and 304 cylinder 4 misfire. Could the 136 be caused by the misfires ? I'd like to just swap out the plugs, but, they seem tricky to get to. Or could it be the coil pack ? 96 crown vic interceptor Thanks

no year car, no country no engines stated, what joy , PAR here.
lots of codes. a barrage of them.
first off i bet you didnt clear them (yes write them down thanks)
then see if they call come back.
this is SOP.
egr is 400
301 is misfire #1
304 is misfire #4
300 is random misfire, so all 4 do.
134 Heated Oxygen Sensor (HO2S) Circuit Insufficient Activity Bank 1 Sensor 1
340 is serious. means
Camshaft Position (CMP) Sensor Circuit
btw all but 400 is caused by 340

but since you posted with no facts, we cant help you can we.
each engine is different ,totally different.
you posted to a USA form that has no such car

The Suzuki Aerio (called the Liana - Life In A New Age - in )

and 7 engines.
all very different.

only this man can guess , engine, and he retired long ago
smart guy him

Carnac,knows all and can guess, and always be right. !!!
but he be off line now. RIP Johnny. Loved him.

codes p 0300 through refer to misfires on each cylinder with the end number ( 301 is no 1 cylinder , 302 is no 2 cylinder ans so on)=== causes --engine mechanical fault , ---wiring---ignition/ fuel ---injector/s---ECT/ MAF sensor/s ---ECM
most misfires are from injector faults like dirty/blocked tips, low fuel pressure , no pulse or problem pulse from ECM rather than plugs and wires and coils
codes p0171 refers to system to lean bank 1===causes ---intake exhaust leak---air system---maf/vaf sensors ---fuel pressure / pump---injectors ---heated oxygen sensor ( HO2S)
code p 0172 is system to rich-====causes ---intake blocked ---EVAP cannister purge valve ---fuel pressure --EGR system---injector/s ---HO2S
couple these two codes with the misfire codes , I suggest you look at the injectors, fuel pressure (too low) from EVAP problem not venting tank, fuel pressure regulator, EGR system

misfiring is more often from--- faulty injectors , wiring to the injectors and fuel pressure than plugs , coils and wires
the codes read fro p 0300 , 301-302-303-304-305-306 and each code indicates the piston that records the fault
misfiring can be from mechanical fault( loose valve inserts - burnt valves - to
wiring , plugs, HT leads, distributor cap faults ( in it doesn't have multiple coils ) , coil/s fuel pressure , injector/s injector wiring and ECM
You need to broaden the scope of investigation to get to the cause and one way to pinpoint the cylinder is to run the fault codes

PO 300 is multiple misfires detected
PO 301, 304, 305, 306 are misfires in cylinders 1,4,5,&6
PO 053 is HO2S Bank 1 Sensor 1 Heater Resistance
PO 106 is MAP/BARO CKT Range / Perf
PO 316 is Misfire detected 1st 1000 Revs.

On a misfire, I usually push towards the spark plugs, plug wires, and coil packs / distributor coil.
You have PO 106 and PO 053 that need to be inquired about at nearest AutoZone.
They can give you an idea as to what is the problem on these.

Did a MAP sensor **** out and cause all the misfires ?
Did a misfire cause the MAP sensor error?
You see what I'm saying ?...Something caused all the misfires...thinking MAP...but not that familiar with the function of the MAP.

Hope this helps...

P300 is random multiple misfire,301 is cylinder 1 misfire. 302 is cylinder 2 misfire & 306 is cylinder 6 misfire. P161 is a bad heater circuit in oxygen sensor bank 2 sensor 2. It is behind catalytic convertor. I would replace downstream oxygen sensor & clear codes. Run vehicle it may be all that is wrong.

hi p -codes are as follows po 301 cylinder 1 missfire detected
po 304 cylinder 4 missfire detected
po 335 crankshaft position sensor A circuit malfunctio
po 750 shift solenoid A malfunction

Generic OBD II Diagnostic Trouble Codes

DTC CODES P0300 to P0399

P0300....Random/Multiple Cylinder Misfire Detected

P0301....Cylinder 1 Misfire Detected

P0302....Cylinder 2 Misfire Detected

P0303....Cylinder 3 Misfire Detected

P0304....Cylinder 4 Misfire Detected

P0305....Cylinder 5 Misfire Detected

P0306....Cylinder 6 Misfire Detected

P0307....Cylinder 7 Misfire Detected

P0308....Cylinder 8 Misfire Detected

P0309....Cylinder 9 Misfire Detected

P0310....Cylinder 10....Misfire Detected

P0311....Cylinder 11 Misfire Detected

P0312....Cylinder 12 Misfire Detected

P0313....Misfire Detected with Low Fuel

P0314....Single Cylinder Misfire (Cylinder not Specified)

P0320....Ignition/Distributor Engine Speed Input Circuit

P0321....Ignition/Distributor Engine Speed Input Circuit Range/Performance

P0322....Ignition/Distributor Engine Speed Input Circuit No Signal

P0323....Ignition/Distributor Engine Speed Input Circuit Intermittent

P0324....Knock Control System Error

P0325....Knock Sensor 1 Circuit (Bank 1 or Single Sensor)

P0326....Knock Sensor 1 Circuit Range/Performance (Bank 1 or Single Sensor)

P0327....Knock Sensor 1 Circuit Low Input (Bank 1 or Single Sensor)

P0328....Knock Sensor 1 Circuit High Input (Bank 1 or Single Sensor)

P0329....Knock Sensor 1 Circuit Input Intermittent (Bank 1 or Single Sensor)

P0330....Knock Sensor 2 Circuit (Bank 2)

P0331....Knock Sensor 2 Circuit Range/Performance (Bank 2)

P0332....Knock Sensor 2 Circuit Low Input (Bank 2)

P0333....Knock Sensor 2 Circuit High Input (Bank 2)

P0334....Knock Sensor 2 Circuit Input Intermittent (Bank 2)

P0335....Crankshaft Position Sensor A Circuit

P0336....Crankshaft Position Sensor A Circuit Range/Performance

P0337....Crankshaft Position Sensor A Circuit Low Input

P0338....Crankshaft Position Sensor A Circuit High Input

P0339....Crankshaft Position Sensor A Circuit Intermittent

P0340....Camshaft Position Sensor 'A' Circuit (Bank 1 or Single Sensor)

P0341 Camshaft Position Sensor 'A' Circuit Range/Performance (Bank 1 or Single Sensor)

P0342....Camshaft Position Sensor 'A' Circuit Low Input (Bank 1 or Single Sensor)

P0343....Camshaft Position Sensor 'A' Circuit High Input (Bank 1 or Single Sensor)

P0344....Camshaft Position Sensor 'A' Circuit Intermittent (Bank 1 or Single Sensor)

P0345....Camshaft Position Sensor 'A' Circuit (Bank 2)

P0346....Camshaft Position Sensor 'A' Circuit Range/Performance (Bank 2)

P0347....Camshaft Position Sensor 'A' Circuit Low Input (Bank 2)

P0348....Camshaft Position Sensor 'A' Circuit High Input (Bank 2)

P0349....Camshaft Position Sensor 'A' Circuit Intermittent (Bank 2)

P0350....Ignition Coil Primary/Secondary Circuit

171 ISFUEL TRIM SYSTEM TO LEAN BANK#1 IE. #1 CLINDER 301 IS MISFIRE # 1CYLINDER I WOULD SAY ITS CAUSED BY A BAD 02 SENSOR BANK 1 THATS OXYGEN SENSOR

It means that your engine is running lean - not getting enough fuel for the amount of air that the engine is receiving. Because your maxima is equipped with a V-6 engine, whatever the problem, it is affecting only bank #1. Bank #1 is always the side of the engine where cylinder #1 is located, or in your case, the left side of the engine as it is viewed while facing the crankshaft end of the engine.
(on a 4 cylinder engine, there is only one bank and it is always referred to as Bank #1)
There are several things that can cause a lean condition including vacuum leaks, a malfunctioning Evaporative Emissions system, a misfiring cylinder (due to bad plugs, bad injectors, or an intake or head gasket leak.), a malfunctioning Mass Airflow sensor (MAF) or Manifold Absolute Pressure sensor (MAP) or even a bad Oxygen sensor (O2s) (Nissan sometimes calls an O2s an "Air-Fuel Ratio Sensor") It is even possible for a leaking vacuum brake booster to cause a lean code.
If there are any other malfunction codes present, it may help to pinpiont the cause of the lean code. (Like a P0301 "cylinder#1 misfire detected", in which case, you would address the misfire code first.)
Certain problems, like a leaking brake booster or a bad MAF will usually set lean codes for BOTH banks.
If the P0171 is the ONLY code present, the most likely cause is a bad O2s, but I recommend some diagnostic testing to prove it before spending the mega-bucks that Nissan gets for their O2 sensors.

1. P0171: This means that the oxygen sensor has detected a lean air-fuel ratio. This can be caused due to a vaccuum leak or a problem in the HO2S circuit or the HO2S (Heated Oxygen Sensor) itself. (Bank one Sensor one). This is commonly located along the exhaust pipe. It could also be a bad Mass Air Flow sensor or a bad Engine Coolant Temperature sensor. Diagnostic checks will be needed to be carried out to be verified though
2. Well as for the other codes, it means #3&4 cylinders are misfiring. It is a possibility that the P0171 code mite have caused the others to show up. I can be wrong though. But it is a strong possibility. If the air fuel mixtue is too lean indeed, mis-firing will occur, unless it is an actual electronic and not a mechnical problem. By the way, when these codes appear, how is the engine's performance. Does it remain the same or behaves poorly?