Scion Cars & Trucks - Page 4 - Recent Questions, Troubleshooting & Support

wheel bearing or cv shaft issue

What did you use to clean the connections? You need to redo them and inspect them for bent pins and shorts.

the same way you replace one in anything else. remove battery cables first,

The obvious thing is one bulb burned out and then shortly after, the second one went. They always go in pairs. Remove them and test them with wires to the battery or with a test meter.

Under intake manifold

It is located in the engine bay, in the fuse/relay box. This is located in towards the firewall on the drivers side. Not sure what your problem is, but that relay also has a fuse in that box that feeds the relay.

https://www.youtube.com/watch?v=X10kUqe7QI0 If the fog lights are OEM the owners manual will show you how and where the switch is. If you need to add the fog lights, then watch this how to video.

Did they replace the tire pressure sensor kits?

Fyi....I know this post is several years old but if my answer can help someone it's worth it. I took my car to the dealership today for literally this EXACT problem on my 2010 Scion xB with 125k miles. I read this post and was shocked to read that someone else's xB was behaving the same way under the same conditions. In 4th gear at around 38 MPH and 1500 RPMs I get a vibration and a noise that, like the OP said, sounds like you're going over a rumble strip. That's the perfect wat to describe it. The dealership told me that it needs a torque converter. They want to charge me a thousand for the part and another thousand for labor because they've got to take the whole transmission out of the car and it's going to take 2 days (really 9 hours, they said, but they'd be keeping the car 2 days). I'm currently calling around to see if ANYONE can do it cheaper, but just in case anyone else comes here looking for an answer to this question, I hope this helps. Torque converter might be your problem.

Looks like you are not the only one who has this problem. Read the following thread for some suggestions. https://www.clubxb.com/threads/xb-fill-up-problem.48524/

https://www.google.com/search?source=univ&tbm=isch&q=need+a+diagram+of+fuel+line+for+a+2005+scion+tc&hl=en&sa=X&ved=2ahUKEwj2-4SLlsLpAhVNZMAKHSpsBlMQsAR6BAgHEAE&biw=1326&bih=627

Yes what do you want to know

torque 22 Nm (224kgF-cm, 16ft,lbs} 9 5 1 3 7 -------------------------------- front of engine torque sequence 10 6 2 4 8

ok first if fan works, it could be that you need to have refrigerant added to system, so youmight want to have a tech shop to look at it

https://www.youtube.com/watch?v=CgC7E0YBknU

Will it not start and run ?

The sensor you are looking for is located on top of the fuel tank. It is actually called an EVAP Fuel Tank Pressure Sensor.

My Regal is 1994. Attached please find my cruise control wire diagram for 1994. Hope it helps. I have not figured out how to attach my photos. Sorry!

FIRST CAP!!!

Crystal ball anyone hey esmarelda check it out