Tag Heuer Watches - Page 3 - Answered Questions & Fixed Issues

How to spot fake Tag Heuer watch Real or Fake TagHeuer How you can tell How to spot the differences between real and fake TAG Heuer Carrera... http://www.camewatchus.org/Tag-Heuer---Link-Quartz-Chronograph-TH---30-1139415703.html How to Spot Fake Replica Tag Heuer Watch

How would one know from the serial number. Numbers are easier to copy than even watches!

Just replaced a women's Aquaracer battery. It's a 364. Get the SR (silver oxide type) as it will last longer.

Just replaced a women's Aquaracer battery. It's a 364. Get the SR (silver oxide type) as it will last longer.

Here is a link to a manual that shows how to set up the watch: TAG Heuer Kirium F1.pdf

"EOL" means "End of Life." The battery needs to be replaced soon. I agree with other post. . . if you had the battery replaced recently, it was bad. I have had my Tag Kirium Formula One for 12 years and have only replaced the battery once.

whats the problem are you trying to fit the new bezel? you will also need to ensure the bezel retention spring is with the bezil

Hi Johar, I will advise you to contact your manufacturer to avoid warranty void due to damage during the process of setting it. Try the link below. Contact Us TAG Heuer

Bring to a reputable jewerle, call first to make sure they can help you. If you need further help, reach me via phone at https://www.6ya.com/expert/frankie_091f536560a54e12

Look on eBay. Make your search with BA0800 this is the Tag Heuer band code. Hope this helps :)

I have it in PDF fileif you still need it let me know

Pull the crown out to the first position, and then you may find that successive pushes of the upper pushbutton will move one of the chrono hands by one division, and the lower pushbutton will move a different chrono hand. Similarly if you pull the crown out to the second position, the pushbuttons will control the other chrono hands. In this way you can set each of the chrono hands to their zero positions. Hope this works..

That means you need a new stem. Stem problems are fairly common on Quartz Tag Heuer watches. Should not cost you more than $100.

Take a look at the watch from the side where the band attaches to the buckle. You should see four holes with one of them having a visible pin in it where the band is connected to the buckle. Moving the band to the right will shorten it moving it to the left will make it bigger. To move it simply get something that you can push the pin in with like a paper clip. Push the pin in and the band should come out move it to the left and push the in again and simply move the band into proper position. Once you do that the pin will snap back into place. If that does not adjust it enough go to your local watch store and they can remove links from the bracelet for you. Shouldn't cost you more than $10.

Whatever will turn the screw without stripping it. Also be careful with those little screws if you drop it on carpet it will take a miracle to find it.

If the second is ticking as normally it is not the battery. If the battery is low the second hand will advance only at 5 second intervals meaning for four seconds the second does not move and on the 5th second it will advance by five seconds. This is a feature unique to Tag Heuer.

You will need special tools. I would not suggest you remove the links yourself on a Tag watch, they can be rather difficult.

These are a top brand and any dealer should be willing to give you advice for free, drop in to a jeweller that sells them, and ask.

You can go to local service center of watch. They will help you to get rid of this problem. http://www.procuffs.com/

It sounds like there may be debris in the gear train. If you bring it to your local watchmaker or jewelry store, they can clean it out for you. you shouldn't have any problems after you do that