Watches - Recent Questions, Troubleshooting & Support

To set the time of your smart watch, just pair the watch again to your phone to sync the time.

The Watches | Answered Yesterday

You need to pair to phone to be used.

Watches | Answered Yesterday

same one you took out ask google

Wenger Watches | Answered Yesterday

Not enough info here to make a decision but most obvious answer is a battery if its a quartz watch

Watches | Answered 2 days ago

When was the last time you had the battery checked? My suggestion would be to send back to the Company to have the battery professionally changed,

Invicta Watches | Answered 2 days ago

Regular wear and exposure to dust, perspiration, household cleaning products, cosmetics,
sunlight, extreme heat and other natural elements can dull the brilliance of gemstones and
precious metals over time. You can TRY a paste of baking soda and vinegar, but other then that, there is not a lot you can do to improve metal appearance.

Michael Kors... | Answered 2 days ago

The number should be found on the back of the watch and in the packaging.

Casio Watches | Answered 2 days ago

Yes! Can you can search the correct brand and model - Ebay is cheap and the best.

Watches | Answered 2 days ago

did you read the instructions?? some you simply push in on the crown to start

Anne Klein... | Answered 3 days ago

it all stems from the watch not actually being waterproof it's more water resistant than waterproof. The little indentations on the back that look like they are for a tool to unscrew it are actually holes i guess for the altimeter and meteo so it can sense pressure. Behind the back just behind the holes is a nylon gauze material and underneath this is a sensor slightly recessed and covered with some kind of waterproof substance. As far as i can see the problems lie here any water sweat or other foreign object than gets into this gauze will eventually will clog this gauze material which at first will affect the altimeter then the meteo. When the gauze has been clogged up severely i gets very dirty indeed which means when it gets wet it takes an age to dry out so if you wear it in the shower like i used to it will never dry out this causes the watch to malfunction quite severely. You can actually fix this problem yourself just get a very small flat screwdriver and lever the back off don't worry it's only a push fit and comes of easily you will see straight away a dirty damp smelly clogged up round piece of nylon gauze clean this up with a bit of WARM not boiling soapy water being careful not to disturb the pressure sensor and it's waterproof goo inside then dry it all and put it together
Hope this helps

Tissot T-Touch... | Answered 3 days ago

Not finding what you are looking for?
Watches Logo

59,840 questions posted

Ask a Question

Usually answered in minutes!

Top Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Arturs Kalnins
Arturs Kalnins

Level 3 Expert

2338 Answers

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

841 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides