Sony HVR - Recent Questions, Troubleshooting & Support - Page 2
Tape door on my sony HVR-HD1000 will not go down
hi,
the tape deck mechanism is faulty, the remedy is to change the mechanism. if you can repair it open take out the mechanism, remove the head, eject housing,and the sensors mechanism locking plate etc, then peel out the flexible cable from the mechanism, and change it.
Why is my sony hvr hd camcoder not switching on
hi,
the fault should be in side the cam, start test from the charger connecting socket, measure the power in the mother board, if any of the fusible resistor or the regulator SMD found faulty, must replace.
No connection between my z7u and my windows 7 computer!, how can i download the driver?
when you bought the camera,is the seller give you the driver CD?normally,windows 7 doesn't need any driver to connect a device, there's might be an error when the windows installed the driverI recomend you to go to the Device Manager,uninstall the current driver,and try to connect your camera again,the windows will re-install the driver automaticallyAnd if you can't find the driver on the internet,you can go to the shop and ask for the driver CDIf those doesn't fix your problem,give me the detail series of your camera and i'll search the internet for it :-)
Sony HVR-A1U "Reinsert Cassette" Error pops up frequently
I have had this error on my 3 year old Sony A1E and it has resulted in glitched picture and audio, despite not showing a poblem whilst recording. It came up with C:31:23 error. Start of the tape seemed ok and the end seemed to get pixellated. A friend said the PD170 had the same issue and had to have her tape heads changed. I've tried cleaning mine but problem still there. I'm looking at getting new NXCAM as I've spent a lot of money last year getting it fixed.
How do I disassemble a 20 zoom lens for a Sony V1U camcorder?
Jeff, to assemble a lens, you need a collimator to make sure all optical elements ate correct in place. You need skills and a manual, to be able to adjust all lens elements in a correct order.
Asking this question, I'm sure you don't have a manual, a collimator and you miss the skills. So if you don't want to end up with a pile if glass, unable to act as a lens, please don't try this yourself. Even Sony will not reassemble the lens if you took it apart. If you really need a lens to b cleaned, please bring it to a Sony certified service centre and ask them what it will cost to clean / replace the lens.
My LED screen has gone
The most likely cause for this is a damaged or defective flexible ribbon cable that connects the LCD to the camera body and will require disassembling the camera and LCD assembly to remove and replace the flex cable. This can be done fairly inexpensively. However, it's not really a user serviceable problem and should be repaired by a qualified service technician.
My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.
If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com.
Not finding what you are looking for?