Packard Bell Recent Questions, Troubleshooting Help & Support

Mih. re post your question, with the complete question,make and model #'s.

In this case, make sure that the monitor is connected properly to the tower and there is no loose connection. Also, cross-check the buttons on the monitor to make sure that the monitor is turned on. If you still face the issue, try connecting your monitor to a different power outlet (if feasible) and see if that works. If the issue still persists, you may consider using another working monitor temporarily (if feasible) to check if there is any issue with your current monitor. If the issue is still not resolved, you are advised to contact a local technician or technical support team of your OEM for further assistance. GuruAid.com

HI Roberto this is Alex Walker expert to help you for this Call +1(404)981-1535 I will be glad to assist you Thank you

Try to Google it.

Either the power cord or power supply or a fuze is bad. Make sure you have a good power outlet.

try to reload the operating system again

use a compressed air can to clean under keyboard.

No, the motherboard chipset will not support the newer technology. While it is true that MBR disks cannot be larger than 2TB, this does not preclude you from using a larger disk as a boot disk. You simply have to partition the drive to make the first (boot) partition 2TB or less. You can then format and install the OS to that partition. You just can't leave the full 4TB as a single drive letter, and most users wouldn't do that anyway.

On the back of the stand/foot there is a rectangular "button" Press that in and keep it pressed and the foot/stand will slide off easilythe

In Short no it doesn't support it BIOS will any support a boot drive of 2TB but you can add it as a secondary drive or use it in an enclosure as a USB drive

que modelos de microprocesadores son compatibles con esta placa?... yo tengo amd 64 x2 4400+ y quisiera saber si podria ponerle alguno superior

Which spirit model? Laptop? or Desktop?