Nostalgia Electrics Popular Questions, Answers, Tips & Manuals

Not replaceable, but you know that.

There are no replacement parts for Nostalgia Electrics equipment. Double check that the kettle is plugged in, that the switch has power. If inclined open kettle and inspect wire connections and continuity, beyond that the popper is not fixable.

Either the motor has failed, or switch. Inspect wires to look far any disconnects. There are no parts available for this manufacturer.

http://www.nostalgiaelectrics.com/manuals/hcm700.pdf Good luck

http://www.nostalgiaelectrics.com/default.asp?a=service At bottom of page find your model.

http://www.nostalgiaelectrics.com/manuals/ofp501.pdf

That is a thermostat, there are no replacements available.

Answered

That is a thermostat. it should have continuity at room temp, and open at popcorn popping temps. There are no replacement parts for this manufacturer.

There are no replacement parts avaialble.

I need a base to my rival beverage fountain which has started to leak, I have really enjoyed it and I dont want to get rid of it because the rest of it is in good condition. BF150/25006EFADD1

Nostalgia does not sell replacement parts for any of their equipment.

You need a new start device if your compressor is not running/pumping.That is the box on the side of the compressor .If you can put your hand on the compressor to make sure it (compressor) is than you have a Freon leak. The small line copper coming off the compressor should be between 75 & approximately 85 if its not ho you have Freon leak somewhere.

dated: Wednesday, November 20th, 2013 Call: Rival Customer Service at 1-800-557-4825 With your model number & part number

8 ounces to a cup - How many ounces of chocolate are you going to use 32 - #ounces of chocolate= #ounces of milk needed

There are no wiring diagrams for this manufacturer. General wiring practices are that the Hot wire(black) goes to the thermostats, and the neutral wire( White ) is attached to the heat element for the return. Switches are on the Black wires to break the circuit before power reaches the item it is controlling. A white wire on a switch is for the return from the light in the switch.

You can download them from www.nostalgiaelectrics.com.

No.1 is it getting power, if it is then check if compressor is running if it is then gas could be the problem, if not running then it could be a board. If it is under 2 years old it will be covered by warranty, contact http://www.nostalgiaelectrics.com/

Let it cool to see if the reset resets, if not, it is time to throw it away. There are no parts or repairs that can be done to that model.

Nostalgia Electronics do not have any replacement parts available, and there is no one that sells them. Sorry.