Lexicon Logo

Lexicon Answered Questions & Fixed Issues

Do you work here? Claim your company

  • 40 Products
  • 269 Answers
  • 39K Views

Call for warranty.

Lexicon RV-8... | Answered on Jul 07, 2017 | 88 views


Lexicon word challenge for PC free download. Microsoft Official Home Page

Lexicon... | Answered on Jun 11, 2017 | 138 views


The latest OS X is 10.13.3
Maybe the newer OS X would help.

Lexicon Lambda... | Answered on Mar 28, 2017 | 59 views


you SHOULD be able to.

Just use Direct Sound in the host tab.

Lexicon Music | Answered on Mar 19, 2017 | 56 views


In my experience, reasons for seeing errors in VST System Link (VSL) are usually due to the digital signal path (audio and/or data) not being routed properly within the System Link dialog box. If for example, you're using s/pdif between two ASIO 2 compatible audio cards properly (OUT of card #1, to IN of card #2 - then OUT of card #2 back IN of card #1), you also have to set your s/pdif System Link I/O channels in the dialog box to the 'same' channel...If say your options are s/pdif channels 9 & 10 (or whatever they are), you set the I/O's of both computers VSL dialog boxes to either channel 9, or all to channel 10. You of course need to route your digital audio properly within your audio interface! (see your cards documentation on that).
You can test if it's routed properly by 'listening' to audio from each computer, from the other...meaning listen at computer 2, from computer 2 & visa-versa. If you hear the audio thhen it should be correct. But in order to 'hear' the audio (besides proper settings in the VSL dialog box) you must 'also' set those digital audio s/pdif channels within Cubase's VST Inputs/connections. But in 'this case', you use both channels 9 & 10 for your Inputs/Outputs. They also say it's best to place your VSL digital audio channels at the top of the Inputs/Outputs list.
You do not need to keep the s/pdif channels in the VST Inputs/connections to make System Link work however, that's if you need to 'listen' or if you need to test whether it's routed properly.
Getting VST System Link working can seem complicated at 1st, but once you understand, and have it working, you realize it's actually not that hard at all. I recommend taking notes, and writing down what you did to make it work, as you go along the way. That has come in very handy when I need to use it again. Also READ your PDF manual and follow that to the letter!

Lexicon Omega... | Answered on Dec 08, 2015 | 134 views


In my experience, reasons for seeing errors in VST System Link (VSL) are usually due to the digital signal path (audio and/or data) not being routed properly within the System Link dialog box. If for example, you're using s/pdif between two ASIO 2 compatible audio cards properly (OUT of card #1, to IN of card #2 - then OUT of card #2 back IN of card #1), you also have to set your s/pdif System Link I/O channels in the dialog box to the 'same' channel...If say your options are s/pdif channels 9 & 10 (or whatever they are), you set the I/O's of both computers VSL dialog boxes to either channel 9, or all to channel 10. You of course need to route your digital audio properly within your audio interface! (see your cards documentation on that).
You can test if it's routed properly by 'listening' to audio from each computer, from the other...meaning listen at computer 2, from computer 2 & visa-versa. If you hear the audio thhen it should be correct. But in order to 'hear' the audio (besides proper settings in the VSL dialog box) you must 'also' set those digital audio s/pdif channels within Cubase's VST Inputs/connections. But in 'this case', you use both channels 9 & 10 for your Inputs/Outputs. They also say it's best to place your VSL digital audio channels at the top of the Inputs/Outputs list.
You do not need to keep the s/pdif channels in the VST Inputs/connections to make System Link work however, that's if you need to 'listen' or if you need to test whether it's routed properly.
Getting VST System Link working can seem complicated at 1st, but once you understand, and have it working, you realize it's actually not that hard at all. I recommend taking notes, and writing down what you did to make it work, as you go along the way. That has come in very handy when I need to use it again. Also READ your PDF manual and follow that to the letter!

Lexicon Omega... | Answered on Dec 08, 2015 | 783 views


Have you checked the cables, jacks, pan settings etc?
There may also be damage to the potentiometer.

Lexicon MX200... | Answered on Sep 02, 2015 | 39 views


Hi
every driver related problem can be solved by using this software: Driver Update Software.
enjoy

Lexicon Lambda... | Answered on Jan 04, 2015 | 2,877 views


you have to set a master and slave(s) devices, and ensure that all the timings (16/24 bit, the 44.1/44/96k) are consistent in all devices

Lexicon I ONIX... | Answered on Jan 03, 2015 | 49 views


Take it back to where you purchased it, they will help you.

Lexicon Alpha... | Answered on Dec 18, 2014 | 35 views


replace your hdmi cable between tv and preamp...lemme know if it works.

Lexicon Audio... | Answered on Mar 24, 2014 | 160 views


you have too much latency in your setup. Try using ASIO as your audio engine in your recording program. Also, shut down all unnecessary programs running on your computer to get better performance.

Lexicon Alpha... | Answered on Nov 10, 2013 | 45 views


check the "buffer" setting - set to the lowest number possible. You can't eliminate the "latency" but you can reduce it a lot. Also 0 try to monitor what you are recording with "live" sound (input instead of output) - also, you may need to download a different driver for your audio card, try ASIO4ALL

Lexicon Alpha... | Answered on Oct 16, 2013 | 56 views


Are there any labels on the fan?

Lexicon LX-7... | Answered on May 19, 2013 | 246 views


Are you trying to use the mic input on the back or plugging it into the instrument input on the front? If you use a low impedance mic with a quarter inch instrument input cord, you would need a transformer adapter to make the mic work on high impedance. Even if you put it on line in, you would still have to convert it. Only the XLR socket on the back will work on a low impedance mic.

Lexicon Alpha... | Answered on Mar 06, 2013 | 164 views


I had the same problem on my VTX65. I noticed it would oscillate with different effects so I removed the effects module. Problem solved. Now it's dead quiet. I use a Digitech RP500 so removing the effects module was a non issue.

Lexicon LX-7... | Answered on May 20, 2014 | 1,279 views


If unt was dropped, look for broken PC board in the vicinity of the rotary encoder. Also look at solder connections to make sure they are sound. A little contact cleaner applied to encoder through an opening so the spray gets inside will help clean contacts. If the knob itself is hard to turn, the shaft is likely bent, and there may be damage to the encoder itself.

Lexicon Mx200... | Answered on Oct 28, 2012 | 233 views


You will have to assign the i/o setting in your DAW's prefrences.

Lexicon I ONIX... | Answered on Oct 10, 2012 | 596 views


Yep that's Vista for you! Try microsoft. com for a patch or the product's website.

Lexicon Omega... | Answered on Sep 26, 2012 | 191 views


There is a major design flaw with the Omega. The ribbon cable touches one of the power tabs that tends to get very hot. this causes the ribbon cable to melt and damages it.

If you open up the case you will se it straight away.

If it is under warranty take it in to be repaired. It is a simple repair and should cost yo nothing.

Otherwise buy a new ribbon cable (I'm guessing most computer shops would sell them). Rplace the old cable with the new one then insulate the new ribbon cable (with electrical tape or something stronger) where it touches the power tab.

I also drilled a few holes in the top and sides of the case (do this carefully as the case is weak).

Be aware tho that drilling holes or altering the case will void your warranty.

Lexicon Omega... | Answered on Aug 12, 2012 | 742 views

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Lexicon Experts

Michial Gueffroy

Level 3 Expert

1140 Answers

Tony Raia

Level 2 Expert

254 Answers

Marvin
Marvin

Level 3 Expert

84565 Answers

Are you a Lexicon Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...